My.Application.Info.Directory wrong path (Urgent please)

[asimzia]

Hi there ,

I have used app.path in VB6.0 and it gives me exact location of my VB Application that is on client pc normally it is C:\Program Files\ProductNa me and on my PC it is C:\Development\ VB.
Using VS 2005 (VB) i am getting this kind of path :


C:\Documents and Settings\azia\L ocal Settings\Applic ation Data\assembly\d l3\30YRGKJ9.HZC \74ELH8JC.ZZX\2 722e3ac\e67c828 d_2b80c701



and my application is trying to find a particular file and obviously it won't be able to find this file in there.

and i actually wanted to get the exact location of the VB application (VS2005)

can anyone please help me in order to provide the similar thing like app.path (VB 6.0) in VB.NET

Thanks,
Asim.

[fauxanadu]

in VB.NET, when you debug a program or build a program, it puts it in a directory such as bin/debug/yadayada. You can change this behavior in the My Project file of VB.NET... double click it and change the debug and build paths to the directory where the files they need to locate are located

[asimzia]

Hi,
Thanks for your reply. I have already tried that and it doesnt seem like its helping.

Thanks,
Asim.

[fauxanadu]

I have found that sometimes it works and sometimes it ignores the settings as well. When it ignores the settings your best bet is to just move the external files to the directory where it is intended to be. If you do not know where it is trying to run the program from, have a messagebox spit out the string for the path to the application and copy the files there. Let me know if this works. If not i'll look deeper into the issue.

[Killer42]

Found this in the usenet archives. Don't know whether it will help or not...

Private Function ApplicationPath() As String
  Return _
  Path.GetDirectoryName([Assembly].GetExecutingAssembly().Location)
End Function

[asimzia]

I have found that sometimes it works and sometimes it ignores the settings as well. When it ignores the settings your best bet is to just move the external files to the directory where it is intended to be. If you do not know where it is trying to run the program from, have a messagebox spit out the string for the path to the application and copy the files there. Let me know if this works. If not i'll look deeper into the issue.

Thanks very much, let me have a look and i will let you know.

Thanks once again.

[asimzia]

Hi,
Thanks for your help, the thing is it is creating a required file in that strange location and picking the file information from there as well. My question is why it is not giving me the path which is actually the location of the product. I have installed my product on a test pc and its location is

C:\Program Files\My Product

So when i wanted to have this path (which is my application path), i should get this folder, so i can copy the file over to this folder. But when i am trying i am getting this path even on my pc (which is a development pc) and something to similar to this on test pc as well.

One thing i wanted to ask you is why my all assemblies (.NET one and interop ones) are copied into this path which is defined below:

C:\Documents and Settings\azia\L ocal Settings\Applic ation Data\assembly\d l3\30YRGKJ9.HZC \74ELH8JC.ZZX

and in the above defined path i have all my assemblies in different folders and each folder hold one assembly file with one inf file which tells you the path of the actual folder.

If you see this will become bit harder, if i installed my product on test pc for everyone who uses that machine using Administrative privileges and logged on with other user and tried to run it will give me an error coz the folder azia (user) is only accessible by the user itself.



Do you think i am doing something wrong, how can i configure these path settings, i am bit confused as in VB6.0 there is nothing like this i just used the simple procedure which uses app.path which gives the location of the Folder. Please if you can tell me further on this , then i will be really greatful to you.

Thanks for your time and your help.
Asim

[fauxanadu]

I think the issue might be that VB.NET stores new projects in a folder based on your windows user name. There is an option that allows you to change the default location that VB.Net stores the projects in. If this is not the problem, please give me the following pieces of information so I can try to figure this one out:

Code Snippet you are using
Build Output from a standard debug build
Start a new project and let me know what the Application Directory is

Also, if you could clarify something: Does the path it save it in change everytime you build the application?

Sorry this is taking so long, but it is an odd error

[asimzia]

When I create a new project which is Extensibility based, it gives me exactly the path which is my development folder (C:\Development \VB.NET), So i think this is not the case.

The path is not changing it will seems like it is same everytime and always go to this path when i try to use My.Application. Info.Directoryp ath :

C:\Documents and Settings\azia\L ocal Settings\Applic ation Data\assembly\d l3\30YRGKJ9.HZC \74ELH8JC.ZZX

I have also attached the code snippet and tried to attach build output from debug but it doesnt allow me to add, so is there any possibility i can email it to you, what i have done is i have copied and pasted the top few lines and the few lines from the end of the output build.

Thanks for you help and support.


Code Snippet:

If VB.Right(AppPath, 1) = "\" Then
                m_sApplicationPath = My.Application.Info.DirectoryPath 
            Else
                m_sApplicationPath = My.Application.Info.DirectoryPath & "\"
            End If
            sLicFileName = m_sApplicationPath & m_sLicName


------ Rebuild All started: Project: MMSJrnEx, Configuration: Debug Any CPU ------
C:\Program Files\Microsoft Visual Studio 8\SDK\v2.0\bin\LC.exe /target:MMSJrnEx.dll /complist:"My Project\licenses.licx" /outdir:obj\Debug\ /i:"C:\Program Files\ComponentOne Studio.NET\bin\C1.Common.dll" /i:"C:\Program Files\ComponentOne Studio.NET\bin\c1.win.c1sizer.dll" /i:"C:\Program Files\ComponentOne Studio.NET\bin\C1.Win.C1TrueDBGrid.dll" /i:..\ExcelUtils.NET\bin\ExcelUtils.dll /i:..\OfficePIAs\Interop.Excel.dll /i:..\OfficePIAs\Interop.Office.dll /i:C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727

\Microsoft.VisualBasic.Compatibility.Data.dll /i:C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\Microsoft.VisualBasic.Compatibility.dll /i:..\SageMMS1\Sage.Accounting.Financials.dll /i:..\SageMMS1\Sage.Common.dll /i:..\SageMMS1\Sage.ObjectStore.dll /i:..\SageMMS1\Sage.Utils.dll /i:..\OfficePIAs\SKCLNET.dll /i:C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727

EmailLicence.designer.vb EmailLicence.vb ErrorHandling.vb frmPostingOptionsBrowse.Designer.vb frmPostingOptionsBrowse.vb frmAccountBrowse.designer.vb frmAccountBrowse.vb FrmBrowse.designer.vb FrmBrowse.vb frmBrowseCalendar.designer.vb frmBrowseCalendar.vb frmCompanyList.designer.vb frmCompanyList.vb frmLic.designer.vb frmLic.vb frmLicUnlock.designer.vb frmLicUnlock.vb frmLogon.vb Globals.vb LicenceMethods.designer.vb LicenceMethods.vb LicenseLocation.designer.vb LicenseLocation.vb LoginDetails.vb MMSJournal.vb MMSJournalDetail.vb MMSJrnErrors.vb MMSJrnEx.vb MMSJrnRangeNames.vb MMSJrnRanges.vb "My Project\AssemblyInfo.vb" "My Project\Application.Designer.vb" "My Project\Resources.Designer.vb" "My Project\Settings.Designer.vb" PPPFunc.vb Progress.designer.vb Progress.vb
========== Rebuild All: 1 succeeded, 0 failed, 0 skipped ==========

[asimzia]

Hi There,

Any further progress to this problem, please let me know because i have to release my application as soon as possible.

Any help will be really appreciated.

Thanks,
Asim.

[Killer42]

Hi There,

Any further progress to this problem, please let me know because i have to release my application as soon as possible.

Any help will be really appreciated.

Have you checked MS's VB6 -> VB.Net upgrade info? It does seem to cover a lot of the differences, perhaps this is one of them.

[asimzia]

Hi There,
Thank you very much for your support and time, i was searching on internet i found this :

System.AppDomai n.CurrentDomain .BaseDirectory( )

It seems like it is returning the required path on my machine (development), i just have to test this thing on the deployment machine, hopefully it will work.

I will let you know guys, but thanks very much for every single thing you told me to try.

Thanks,
Asim.

[asimzia]

Hi,

Yes it works.

Thanks again.
Asim.

[Killer42]

Yes it works.
Thanks again.

Excellent! :)

I'm glad to see you resolved the problem, and hope we were some help.