Issues w/ using a DataTable with a TableAdapter's Update method

[Craig Buchanan]

I created a TableAdapter (TA) in my VB 2005 project. I tested it to ensure
that its CRUD functionality is what I expected it to be.

I'm using the TA and its strongly-typed DataTable (DT) in my Wizard.
Initially, I populate the DT using the TA.GetData.

I pass the DT to a ASCX-styled control that 'pivots' (turns years into
columns) the data into a new DataTable (DT2), then binds it (DT2) to a
GridView form. I save the original DT in the viewstate. So far so good.

When I want to save the data, I compare the values in GridView to the DT
that has been retrieve from the viewstate. The DT's rows are modified
accordingly. So far so good.

However, when I attempt to use the TA's Update method, passing the DT, I get
an error about a missing parameter. I'm assuming that the parameter's value
is supplied by the field that has a matching name. I've noticed that each
row has a value in this field.

What am I missing here?

Another oddity, perhaps. If don't make an changes in the pivot grid, there
won't be any changes to the DT. Why is it that the each row's rowstate is
'modified'? Could this be related my the Update issue?

Thanks in advance.

Craig Buchanan

[Craig Buchanan]

Re: Issues w/ using a DataTable with a TableAdapter's Update method

Solved my own problem.

The first issue related to the parameter collection for the InsertCommand
and UpdateCommand. While the ParameterName was correct, the SourceColumn's
value didn't match the value in the DataTable. One needs to review the
parameter collection more closely after changing the command's CommandText.
Once the parameters were corrected, the TableAdapter's Update command worked
correctly.

The second issue related to how I was assigning values to each row in the
DT. I changed the logic to only change the field's value if the new value
(supplied by a TextBox) differed. As a result, the rowstates reflected what
I would expect.

Hope this helps someone.

"Craig Buchanan" <someone@micros oft.comwrote in message
news:%23DPD2mE6 IHA.3696@TK2MSF TNGP04.phx.gbl. ..

>I created a TableAdapter (TA) in my VB 2005 project. I tested it to ensure
>that its CRUD functionality is what I expected it to be.
>
I'm using the TA and its strongly-typed DataTable (DT) in my Wizard.
Initially, I populate the DT using the TA.GetData.
>
I pass the DT to a ASCX-styled control that 'pivots' (turns years into
columns) the data into a new DataTable (DT2), then binds it (DT2) to a
GridView form. I save the original DT in the viewstate. So far so good.
>
When I want to save the data, I compare the values in GridView to the DT
that has been retrieve from the viewstate. The DT's rows are modified
accordingly. So far so good.
>
However, when I attempt to use the TA's Update method, passing the DT, I
get an error about a missing parameter. I'm assuming that the parameter's
value is supplied by the field that has a matching name. I've noticed
that each row has a value in this field.
>
What am I missing here?
>
Another oddity, perhaps. If don't make an changes in the pivot grid,
there won't be any changes to the DT. Why is it that the each row's
rowstate is 'modified'? Could this be related my the Update issue?
>
Thanks in advance.
>
Craig Buchanan
>