PSC USb POS Scanner

[steve]

Hi All

I have a PSC Magellan Scanner 1000i USb and can't seem to find how to
control it from a VB.net 2005 application

The serial version of it works fine but I can't load any of the USB drivers
into VB
There is no information on the PSC website

Has anybody had any experience with this type of hardware

Regards
Steve

[Kevin Yu [MSFT]]

RE: PSC USb POS Scanner

Hi Steve,

To program such type of hardwares, you have to get an SDK for it. The SDK
talks to the driver and controls the hardware. It will be very complicated
if you decide to program with only the driver yourself. You can try to
contact the hardware vendor for the SDK.

Kevin Yu
Microsoft Online Community Support

=============== =============== =============== =====
Get notification to my posts through email? Please refer to

http://msdn.microsoft.com/subscriptions/managednewsgroups/default.aspx#notif

ications.
Note: The MSDN Managed Newsgroup support offering is for non-urgent issues
where an initial response from the community or a Microsoft Support
Engineer within 1 business day is acceptable. Please note that each follow
up response may take approximately 2 business days as the support
professional working with you may need further investigation to reach the
most efficient resolution. The offering is not appropriate for situations
that require urgent, real-time or phone-based interactions or complex
project analysis and dump analysis issues. Issues of this nature are best
handled working with a dedicated Microsoft Support Engineer by contacting
Microsoft Customer Support Services (CSS) at
http://msdn.microsoft.com/subscripti...t/default.aspx.
=============== =============== =============== =====

(This posting is provided "AS IS", with no warranties, and confers no
rights.)