Trigger

[Shane]

I have been instructed to write a trigger that effectively acts as a foreign
key. The point (I think) is to get me used to writing triggers that dont
use the primary key(s)

I have created the following trigger

create trigger chk_team
on teams
for insert as
declare @chkCountry as char(2)
select @chkCountry = (select country from INSERTED)
-- if @@ROWCOUNT =0 RETURN
If @chkCountry NOT IN
(select distinct country from teams)
BEGIN
raiserror('Impo ssible country entered', 16, 1)
ROLLBACK TRANSACTION
END

However I tested it with the following insert statement

insert into teams values (15, 'London Paris', 'UK', 'Clive Woodward', 0,
NULL)

Which (unfortunately) works, IOW the above insert statement should cause the
error I specified as 'UK' does not exist in the set "select distinct
country from teams"

Any help appreciated

[Shane]

Re: Trigger

Shane wrote:

I have been instructed to write a trigger that effectively acts as a
foreign
key. The point (I think) is to get me used to writing triggers that dont
use the primary key(s)
>
I have created the following trigger
>
create trigger chk_team
on teams
for insert as
declare @chkCountry as char(2)
select @chkCountry = (select country from INSERTED)
-- if @@ROWCOUNT =0 RETURN
If @chkCountry NOT IN
(select distinct country from teams)
BEGIN
raiserror('Impo ssible country entered', 16, 1)
ROLLBACK TRANSACTION
END
>
However I tested it with the following insert statement
>
insert into teams values (15, 'London Paris', 'UK', 'Clive Woodward', 0,
NULL)
>
Which (unfortunately) works, IOW the above insert statement should cause
the error I specified as 'UK' does not exist in the set "select distinct
country from teams"
>
Any help appreciated

I have got the triger working as I desire, however now I am perplexed as to
*why* it works..
The (new) trigger reads:

create trigger chk_team
on teams
for insert as
declare @chkCountry as char(2)
select @chkCountry = (select country from INSERTED)
-- if @@ROWCOUNT =0 RETURN
If @chkCountry IN
        (select distinct country from teams)
BEGIN
        raiserror('Impo ssible country entered', 16, 1)
        ROLLBACK TRANSACTION
END


I am now _seriously_ confused
--
Q: Who knows everything there is to be known about vector analysis?
A: The Oracle of del phi!

[Shane]

Re: Trigger

Shane wrote:

I am now _seriously_ confused

The trigger fires *after* an insert has taken place, therefore in the
second case the trigger rollsback because the country does now indeed exist
in the subquery

Any ideas?

--
Q: What does a mathematician present to his fiancée when he wants to
propose?
A: A polynomial ring!

[Razvan Socol]

Re: Trigger

Hello, Shane

When you write triggers, you should not assume that the INSERTED table
will always contain only one row.

Let's consider the following DDL and sample data:

CREATE TABLE Countries (
CountryCode char(2) PRIMARY KEY, --ISO 3166-1 alpha 2
CountryName varchar(50) UNIQUE
)

INSERT INTO Countries VALUES ('US','United States')
INSERT INTO Countries VALUES ('GB','United Kindom')
INSERT INTO Countries VALUES ('FR','France')
INSERT INTO Countries VALUES ('RO','Romania' )

CREATE TABLE teams (
TeamName varchar(50) PRIMARY KEY,
CountryCode char(2) --REFERENCES Countries
)

I would write the following trigger:

CREATE TRIGGER teams_IU_CheckC ountry ON teams
FOR INSERT, UPDATE
AS
IF @@ROWCOUNT>0 AND UPDATE(CountryC ode) BEGIN
IF EXISTS (
SELECT * FROM inserted
WHERE CountryCode NOT IN (SELECT CountryCode FROM Countries)
) BEGIN
RAISERROR ('Incorrect country code !',16,1)
ROLLBACK
RETURN
END
END

We can check how it works using these statements:

INSERT INTO teams VALUES ('Chicago Bulls', 'US')
INSERT INTO teams VALUES ('Steaua Bucuresti', 'RO')

INSERT INTO teams SELECT Team, 'GB' FROM (
SELECT 'Manchester United' Team
UNION ALL SELECT 'Arsenal'
) x

INSERT INTO teams VALUES ('Juventus', 'IT')
--the last INSERT will fail because we have not entered the country
code for Italy

However, this trigger is not enough to ensure referential integrity,
we also need a trigger for the Countries table:

CREATE TRIGGER countries_UD_Ch eckTeams ON Countries
FOR UPDATE, DELETE
AS
IF @@ROWCOUNT>0 BEGIN
IF EXISTS (
SELECT * FROM teams
WHERE CountryCode IN (SELECT CountryCode FROM deleted)
AND CountryCode NOT IN (SELECT CountryCode FROM Countries)
) BEGIN
RAISERROR('This country code is used by a team !',16,1)
ROLLBACK
RETURN
END
END

GO
DELETE Countries WHERE CountryCode='FR '
-- works OK

DELETE Countries WHERE CountryCode='RO '
-- error, because we have a team

Of course, instead of using such triggers, it's much more prefferable
to have real foreign keys, because of performance reasons (both for
modifications and SELECT-s), ease of development (why write 20 lines
of code when you can write 2 words?), functionality (we can create a
cascading FK), etc.

Razvan

[DA Morgan]

Re: Trigger

Shane wrote:

Shane wrote:
>

>I am now _seriously_ confused

>
The trigger fires *after* an insert has taken place, therefore in the
second case the trigger rollsback because the country does now indeed exist
in the subquery
>
Any ideas?

That is one of the major problems with a product that only has AFTER
triggers. In those products that have both BEFORE and AFTER triggers,
AFTER triggers are used for auditing and BEFORE triggers used for
security and integrity. Essentially you are trying to do the right
thing, in the wrong way, in a product that truly doesn't support it.

Turn what you are doing into a multiuser environment with hundreds
or thousands of simultaneous users and it is a nightmare. Perhaps a
good learning experience ... but a nightmare.
--
Daniel A. Morgan
University of Washington
damorgan@x.wash ington.edu
(replace x with u to respond)

https://www.psoug.org

[Erland Sommarskog]

Re: Trigger

DA Morgan (damorgan@psoug .org) writes:

>The trigger fires *after* an insert has taken place, therefore in the
>second case the trigger rollsback because the country does now indeed
>exist in the subquery
>>
>Any ideas?

>
That is one of the major problems with a product that only has AFTER
triggers. In those products that have both BEFORE and AFTER triggers,
AFTER triggers are used for auditing and BEFORE triggers used for
security and integrity. Essentially you are trying to do the right
thing, in the wrong way, in a product that truly doesn't support it.

Actually, SQL Server also has INSTEAD OF triggers, which is not really
the same thing as an BEFORE trigger. Since an INSTEAD OF trigger requires
you to redo the action that trigger it, it less apetizing for checks -
unless the check is of the kind "DELETE is not permitted on this table".

But a BEFORE trigger would not have help Shane, as his trigger seemed to
perform a check against existing data in the table. The logic appears
to be "it's OK to insert UK in the table if it's already there". His
AFTER trigger permits everything. But a BEFORE trigger would have kept
the table empty.




--
Erland Sommarskog, SQL Server MVP, esquel@sommarsk og.se

Books Online for SQL Server 2005 at

http://www.microsoft.com/technet/prodtechnol/sql/2005/downloads/books.mspx

Books Online for SQL Server 2000 at

http://www.microsoft.com/sql/prodinfo/previousversions/books.mspx

[Shane]

Re: Trigger

Erland Sommarskog wrote:

DA Morgan (damorgan@psoug .org) writes:

>>The trigger fires *after* an insert has taken place, therefore in the
>>second case the trigger rollsback because the country does now indeed
>>exist in the subquery
>>>
>>Any ideas?

>>
>That is one of the major problems with a product that only has AFTER
>triggers. In those products that have both BEFORE and AFTER triggers,
>AFTER triggers are used for auditing and BEFORE triggers used for
>security and integrity. Essentially you are trying to do the right
>thing, in the wrong way, in a product that truly doesn't support it.

>
Actually, SQL Server also has INSTEAD OF triggers, which is not really
the same thing as an BEFORE trigger. Since an INSTEAD OF trigger requires
you to redo the action that trigger it, it less apetizing for checks -
unless the check is of the kind "DELETE is not permitted on this table".
>
But a BEFORE trigger would not have help Shane, as his trigger seemed to
perform a check against existing data in the table. The logic appears
to be "it's OK to insert UK in the table if it's already there". His
AFTER trigger permits everything. But a BEFORE trigger would have kept
the table empty.
>
>
>
>

Hi
Yes you are correct, my trigger would keep a new table empty, however this
trigger is being written for an existing table, that has existing entries.
I think the point of my trigger is supposed to keep the country list static.

I have used the following trigger, however I am not happy with it, as the
values are hard-coded.

create trigger chk_team
on teams
for insert as
declare @chkCountry as char(2)
select @chkCountry = (select country from INSERTED)
if @@ROWCOUNT =0 RETURN
If @chkCountry NOT IN ('NZ', 'AU', 'SA')

BEGIN
raiserror('Impo ssible country entered', 16, 1)
ROLLBACK TRANSACTION
END

--
Q: How can you tell that a mathematician is extroverted?
A: When talking to you, he looks at your shoes instead of at his.

[Erland Sommarskog]

Re: Trigger

Shane (shane@weasel.i s-a-geek.net) writes:

Yes you are correct, my trigger would keep a new table empty, however
this trigger is being written for an existing table, that has existing
entries. I think the point of my trigger is supposed to keep the country
list static.
>
I have used the following trigger, however I am not happy with it, as the
values are hard-coded.

If there is a key in this table, then it is not that tricky:

CREATE TRIGGER no_more_teams ON tbl AFTER INSERT, UPDATE AS
IF EXISTS (SELECT *
FROM inserted i
WHERE NOT EXISTS (SELECT *
FROM tbl
WHERE tbl.teamid <i.teamid
AND tbl.country = i.country))
BEGIN
ROLLBACK TRANSACTION
RAISERROR ('No more countries permitted!', 16, 1)
END

create trigger chk_team
on teams
for insert as
declare @chkCountry as char(2)
select @chkCountry = (select country from INSERTED)

Again: you must not do this. A trigger must be able to handle the
situation more than one row is inserted, so you cannot select into
a variable.

....Wait! Slap me on the face! The trigger above will also not handle
multi-row inserts correctly, but may permit new countries in this case.
OK, so it is a bit more tricker. What about:


IF EXISTS (SELECT *
FROM (SELECT country, COUNT(*) AS cnt
FROM inserted
GROUP BY country) AS i
JOIN (SELECT country, COUNT(*) AS cnt
FROM tbl
GROUP BY country) AS t ON t.country = i.country
WHERE t.cnt = i.cnt)
BEGIN
ROLLBACK TRANSACTION
RAISERROR ('No more countries permitted!', 16, 1)
END

Or write an INSTEAD OF trigger, in which case your original logic
will work. But you still need to handle multi-row inserts.)

--
Erland Sommarskog, SQL Server MVP, esquel@sommarsk og.se

Books Online for SQL Server 2005 at

http://www.microsoft.com/technet/prodtechnol/sql/2005/downloads/books.mspx

Books Online for SQL Server 2000 at

http://www.microsoft.com/sql/prodinfo/previousversions/books.mspx