While Loop with a StreamReader process included for fun

**=?Utf-8?B?TWFuaXNoIEJhZm5h?=** · Dec 18 '07, 12:15 PM

RE: While Loop with a StreamReader process included for fun

Hi,
Try below code which will help you atleast know exact problem:
// show error if user specified invalid file
if ( fileName == "" || fileName == null )
MessageBox.Show ( "Invalid File Name", "Error",
MessageBoxButto ns.OK, MessageBoxIcon. Error );
else
{
// create FileStream to obtain read access to file
input = new FileStream( fileName, FileMode.Open,
FileAccess.Read );

// set file from where data is read
fileReader = new StreamReader( input );
}
As We pass constant FileMode.Open as the second argument to the FileStream
constructor to indicate that the FileStream should open the file if it exists
or should throw a FileNotFoundExc eption if the file does not exist

--
Hope this helps.
Thanks and Regards.
Manish Bafna.
MCP and MCTS.

"William Foster" wrote:

Good evening all,
>
I am trying to write a process that uses a while loop to cycle multiple
files from an array throught the StreamReader Process.
>
The whole thing works using:
>
Dim Import_File_Rea der As System.IO.Strea mReader
>
While ...
Import_File_Rea der = New StreamReader(Im port_File_and_P ath)
.... Extract all the data I want then start again ....
End While
>
However, when I get to the second run through it always return an error
saying that there was an illegal character included in the
Import_File_and _Path variable; on checking there are no illegal characters.
All I can think is that without closing off the Import_File_Rea der variable
before running through the While loop for a second time it will not work,
however, when I add in Import_File_Rea der.Close towards the bottom of the
While Loop it still doesn't work [The same error is returned].
>
I am a bit lost know, if anyone has any ideas on how to get this to work it
would be greatly appreciated if you could respond to this query as I am left
with the option of opening every file seperately through different variables
if this doesn't work; and with over 700 files to be opened I am not liking
that option.
>
Yours sincerely,
>
William Foster

**=?Utf-8?B?V2lsbGlhbSBGb3N0ZXI=?=** · Dec 19 '07, 12:05 AM

RE: While Loop with a StreamReader process included for fun

Manish,

Thanks for the help, however, I have already confirmed the file name are
correct and don't contain any errors. I have used the internal function to
automatically load an array with files within a directory that meet a certain
criteria.

I think the error being returned has nothing to do with the actual error.

If you have any further thoughts let me know.

Yours sincerely,

William Foster

"Manish Bafna" wrote:

Hi,
Try below code which will help you atleast know exact problem:
// show error if user specified invalid file
if ( fileName == "" || fileName == null )
MessageBox.Show ( "Invalid File Name", "Error",
MessageBoxButto ns.OK, MessageBoxIcon. Error );
else
{
// create FileStream to obtain read access to file
input = new FileStream( fileName, FileMode.Open,
FileAccess.Read );
>
// set file from where data is read
fileReader = new StreamReader( input );
}
As We pass constant FileMode.Open as the second argument to the FileStream
constructor to indicate that the FileStream should open the file if it exists
or should throw a FileNotFoundExc eption if the file does not exist
>
>
>
--
Hope this helps.
Thanks and Regards.
Manish Bafna.
MCP and MCTS.
>
>
>
"William Foster" wrote:
>

Good evening all,

I am trying to write a process that uses a while loop to cycle multiple
files from an array throught the StreamReader Process.

The whole thing works using:

Dim Import_File_Rea der As System.IO.Strea mReader

While ...
Import_File_Rea der = New StreamReader(Im port_File_and_P ath)
.... Extract all the data I want then start again ....
End While

However, when I get to the second run through it always return an error
saying that there was an illegal character included in the
Import_File_and _Path variable; on checking there are no illegal characters.
All I can think is that without closing off the Import_File_Rea der variable
before running through the While loop for a second time it will not work,
however, when I add in Import_File_Rea der.Close towards the bottom of the
While Loop it still doesn't work [The same error is returned].

I am a bit lost know, if anyone has any ideas on how to get this to work it
would be greatly appreciated if you could respond to this query as I am left
with the option of opening every file seperately through different variables
if this doesn't work; and with over 700 files to be opened I am not liking
that option.

Yours sincerely,

William Foster

**=?Utf-8?B?TW9oYW1hZCBFbGFyYWJp?=** · Dec 19 '07, 04:25 AM

RE: While Loop with a StreamReader process included for fun

You are currently dimming a single streamreader, not initializing it, and
then initializing it over and over in your loop.

There might be a better way of doing this and it actually confirms that the
object is destroyed. That is by using the "Using" clause. The "Using" clause
makes sure the object is completely destroyed outside the Using range.

Example:

While . . .
'Insert code to populate sFilePath
Using Import_File_Rea der as New System.IO.Strea mReader(sFilePa th)
... Extract data from file. etc
'No need to destroy the file reader it is automatically destroyed by
the engine.
End Using
End While

Let me know if that helps. Good luck.

--
Mohamad Elarabi
Lead Developer. MCTS, MCPD.

"William Foster" wrote:

Good evening all,
>
I am trying to write a process that uses a while loop to cycle multiple
files from an array throught the StreamReader Process.
>
The whole thing works using:
>
Dim Import_File_Rea der As System.IO.Strea mReader
>
While ...
Import_File_Rea der = New StreamReader(Im port_File_and_P ath)
.... Extract all the data I want then start again ....
End While
>
However, when I get to the second run through it always return an error
saying that there was an illegal character included in the
Import_File_and _Path variable; on checking there are no illegal characters.
All I can think is that without closing off the Import_File_Rea der variable
before running through the While loop for a second time it will not work,
however, when I add in Import_File_Rea der.Close towards the bottom of the
While Loop it still doesn't work [The same error is returned].
>
I am a bit lost know, if anyone has any ideas on how to get this to work it
would be greatly appreciated if you could respond to this query as I am left
with the option of opening every file seperately through different variables
if this doesn't work; and with over 700 files to be opened I am not liking
that option.
>
Yours sincerely,
>
William Foster

**=?Utf-8?B?V2lsbGlhbSBGb3N0ZXI=?=** · Dec 19 '07, 10:45 AM

RE: While Loop with a StreamReader process included for fun

Mohamad,

Thanks for your assistance, on the good side your recommendation has
certainly improved my coding. On the bad side it did not resolve my error;
on further investigation [painful investigation] I found that I had misplaced
a vbCr within a seperate process which was coming into causing the error.

Thanks for your help!

William Foster

"Mohamad Elarabi" wrote:

You are currently dimming a single streamreader, not initializing it, and
then initializing it over and over in your loop.
>
There might be a better way of doing this and it actually confirms that the
object is destroyed. That is by using the "Using" clause. The "Using" clause
makes sure the object is completely destroyed outside the Using range.
>
Example:
>
While . . .
'Insert code to populate sFilePath
Using Import_File_Rea der as New System.IO.Strea mReader(sFilePa th)
... Extract data from file. etc
'No need to destroy the file reader it is automatically destroyed by
the engine.
End Using
End While
>
Let me know if that helps. Good luck.
>
--
Mohamad Elarabi
Lead Developer. MCTS, MCPD.
>
>
"William Foster" wrote:
>

Good evening all,

I am trying to write a process that uses a while loop to cycle multiple
files from an array throught the StreamReader Process.

The whole thing works using:

Dim Import_File_Rea der As System.IO.Strea mReader

While ...
Import_File_Rea der = New StreamReader(Im port_File_and_P ath)
.... Extract all the data I want then start again ....
End While

However, when I get to the second run through it always return an error
saying that there was an illegal character included in the
Import_File_and _Path variable; on checking there are no illegal characters.
All I can think is that without closing off the Import_File_Rea der variable
before running through the While loop for a second time it will not work,
however, when I add in Import_File_Rea der.Close towards the bottom of the
While Loop it still doesn't work [The same error is returned].

I am a bit lost know, if anyone has any ideas on how to get this to work it
would be greatly appreciated if you could respond to this query as I am left
with the option of opening every file seperately through different variables
if this doesn't work; and with over 700 files to be opened I am not liking
that option.

Yours sincerely,

William Foster

**=?Utf-8?B?TW9oYW1hZCBFbGFyYWJp?=** · Dec 19 '07, 11:15 AM

RE: While Loop with a StreamReader process included for fun

William, happy to help and happier you found the problem. :) Debugging
something like this might feel like shooting in the dark :) I was mainly
trying to address your concern that the object isn't clearing. But I'm glad
that the error message was more relevant to the problem than just the object
not clearing.
Thanks,

--
Mohamad Elarabi
Lead Developer. MCTS, MCPD.

"William Foster" wrote:

Mohamad,
>
Thanks for your assistance, on the good side your recommendation has
certainly improved my coding. On the bad side it did not resolve my error;
on further investigation [painful investigation] I found that I had misplaced
a vbCr within a seperate process which was coming into causing the error.
>
Thanks for your help!
>
William Foster
>
"Mohamad Elarabi" wrote:
>

You are currently dimming a single streamreader, not initializing it, and
then initializing it over and over in your loop.

There might be a better way of doing this and it actually confirms that the
object is destroyed. That is by using the "Using" clause. The "Using" clause
makes sure the object is completely destroyed outside the Using range.

Example:

While . . .
'Insert code to populate sFilePath
Using Import_File_Rea der as New System.IO.Strea mReader(sFilePa th)
... Extract data from file. etc
'No need to destroy the file reader it is automatically destroyed by
the engine.
End Using
End While

Let me know if that helps. Good luck.

--
Mohamad Elarabi
Lead Developer. MCTS, MCPD.

"William Foster" wrote:

Good evening all,
>
I am trying to write a process that uses a while loop to cycle multiple
files from an array throught the StreamReader Process.
>
The whole thing works using:
>
Dim Import_File_Rea der As System.IO.Strea mReader
>
While ...
Import_File_Rea der = New StreamReader(Im port_File_and_P ath)
.... Extract all the data I want then start again ....
End While
>
However, when I get to the second run through it always return an error
saying that there was an illegal character included in the
Import_File_and _Path variable; on checking there are no illegal characters.
All I can think is that without closing off the Import_File_Rea der variable
before running through the While loop for a second time it will not work,
however, when I add in Import_File_Rea der.Close towards the bottom of the
While Loop it still doesn't work [The same error is returned].
>
I am a bit lost know, if anyone has any ideas on how to get this to work it
would be greatly appreciated if you could respond to this query as I am left
with the option of opening every file seperately through different variables
if this doesn't work; and with over 700 files to be opened I am not liking
that option.
>
Yours sincerely,
>
William Foster

While Loop with a StreamReader process included for fun

While Loop with a StreamReader process included for fun

Comment

Comment

Comment

Comment

Comment