Hello,
I have problem using dial-up connection with Fedora. My modem is not detected by the system.I have tried to install some drivers (*.tar) but didn't work.I'm not sure if this modem is not supported or detected or some configuration is just missing.Using my modem with my Win-XP works fine.
What should I use with these selections?
--------------------------------------------------------------------------------
From System Settings -> Network Configuration -> Hardware Tab -> (double click) ->
Ethernet - ok
Modem Configuration - configured
Modem device:
/dev/modem
/dev/ttyS0
/dev/ttyS1
/dev/ttyS2
/dev/ttyS3
/dev/ttyI0
/dev/ttyI1
/dev/ttyI2
/dev/ttyI3
/dev/input/ttyACM0
/dev/input/ttyACM1
/dev/input/ttyACM3
/dev/ttyM0
/dev/ttyM1
Baud rate: 300 - 460800
Flow Control: None / Software (XON/XOFF) / Hardware (CRTSCTS)
I have problem using dial-up connection with Fedora. My modem is not detected by the system.I have tried to install some drivers (*.tar) but didn't work.I'm not sure if this modem is not supported or detected or some configuration is just missing.Using my modem with my Win-XP works fine.
What should I use with these selections?
--------------------------------------------------------------------------------
From System Settings -> Network Configuration -> Hardware Tab -> (double click) ->
Ethernet - ok
Modem Configuration - configured
Modem device:
/dev/modem
/dev/ttyS0
/dev/ttyS1
/dev/ttyS2
/dev/ttyS3
/dev/ttyI0
/dev/ttyI1
/dev/ttyI2
/dev/ttyI3
/dev/input/ttyACM0
/dev/input/ttyACM1
/dev/input/ttyACM3
/dev/ttyM0
/dev/ttyM1
Baud rate: 300 - 460800
Flow Control: None / Software (XON/XOFF) / Hardware (CRTSCTS)