Requesting advice how to clean up C code for validating string represents integer

**Bill Pursell** · Feb 11 '07, 08:55 AM

Re: Requesting advice how to clean up C code for validating string represents integer

On Feb 11, 6:57 am, rem6...@yahoo.c om (robert maas, see http://
tinyurl.com/uh3t) was asking about code that:

verifies the text within a field to make sure it is a valid
representation of an integer, without any junk thrown in, i.e. it
must satisfy the regular expression: ^ *[-+]?[0-9]+ *$
>
If the contents of the field are wrong I want to diagnose as much
as reasonable what's wrong, not just say "syntax error".
>

[snip]

Do any of you have any other ideas what I might do to clean
up the C code? Don't write my code for me, but just give hints what
library routines might do 90% of the work for me, or suggest
re-design of the algorithm?

You could try something as simple as this:

strtol( string, &end, BASE );
if( *end != '\0' )
fprintf( stderr, "syntax error starting at '%c'\n", *end);

I'm not sure that this gives you as much syntax error
as you want, but it tells you where it occurs. (Also,
this doesn't exactly match your specification, since
this doesn't allow trailing whitespace, but that's
a trivial fix.)

--
Bill Pursell

**Flash Gordon** · Feb 11 '07, 10:05 AM

Re: Requesting advice how to clean up C code for validating stringrepresent s integer

robert maas, see http://tinyurl.com/uh3t wrote, On 11/02/07 06:57:

I'm working on examples of programming in several languages, all
(except PHP) running under CGI so that I can show both the source
files and the actually running of the examples online. The first
set of examples, after decoding the HTML FORM contents, merely
verifies the text within a field to make sure it is a valid
representation of an integer, without any junk thrown in, i.e. it
must satisfy the regular expression: ^ *[-+]?[0-9]+ *$
>
If the contents of the field are wrong I want to diagnose as much
as reasonable what's wrong, not just say "syntax error".

<snip>

Now we come to C: I presently have a horrible mess:
http://www.rawbw.com/~rem/HelloPlus/...4s.html#h4intc

<snip>

to C. Do any of you have any other ideas what I might do to clean
up the C code? Don't write my code for me, but just give hints what
library routines might do 90% of the work for me, or suggest
re-design of the algorithm? One thing I don't want to do is

<snip>

Good, we generally prefer to give help rather than do peoples work for
them :-)

I would suggest you look at the strto* functions which are part of
standard C taking specific note of the second and third parameters,
since you want to use both. The second parameter is used to tell you the
first invalid character (or the end of the string if completely valid)
and the last parameter to specify base 10 which is what the user will
expect. These functions will even tell you if the number in the string
is out of range for the type it is converted to. Finally, since there is
no strtoi you will probably have to use strtol and then check if it is
in the range of an int before assigning it to an int.
--
Flash Gordon

**Random832** · Feb 11 '07, 10:55 AM

Re: Requesting advice how to clean up C code for validating string represents integer

2007-02-11 <rem-2007feb10-003@yahoo.com>,
robert maas, see http://tinyurl.com/uh3t wrote:

I'm working on examples of programming in several languages, all
(except PHP) running under CGI so that I can show both the source
files and the actually running of the examples online. The first
set of examples, after decoding the HTML FORM contents, merely
verifies the text within a field to make sure it is a valid
representation of an integer, without any junk thrown in, i.e. it
must satisfy the regular expression: ^ *[-+]?[0-9]+ *$

I'd use strtol with a base of 10.

Things to consider:
1. It doesn't care if there's junk after the numbers, but why do you?
You can always examine *endptr.
2. Won't work for converting integers greater than eleventy billion or
however much your system supports. But how do you intend to convert
them otherwise?

**CBFalconer** · Feb 11 '07, 02:45 PM

Re: Requesting advice how to clean up C code for validating stringrepresent s integer

"robert maas, see http://tinyurl.com/uh3t" wrote:

>
I'm working on examples of programming in several languages, all
(except PHP) running under CGI so that I can show both the source
files and the actually running of the examples online. The first
set of examples, after decoding the HTML FORM contents, merely
verifies the text within a field to make sure it is a valid
representation of an integer, without any junk thrown in, i.e. it
must satisfy the regular expression: ^ *[-+]?[0-9]+ *$
>
If the contents of the field are wrong I want to diagnose as much
as reasonable what's wrong, not just say "syntax error".
>
Because perl and PHP include support for regular expressions, it
was obvious how to do it, and easy to accomplish:

Perl and PHP are off-topic here. Regular expressions are only
topical in reference to code to implement them. In addition, you
RE is wrong. A numeric field ends when the next character cannot
be used, not on a blank. This is easily done in C, see the
following example:. Note that it leaves detection and use of +- to
the calling function, similarly the decision about the termination
char. Note that this parses a stream.

/*--------------------------------------------------------------
* Read an unsigned value. Signal error for overflow or no
* valid number found. Returns 1 for error, 0 for noerror, EOF
* for EOF encountered before parsing a value.
*
* Skip all leading blanks on f. At completion getc(f) will
* return the character terminating the number, which may be \n
* or EOF among others. Barring EOF it will NOT be a digit. The
* combination of error, 0 result, and the next getc returning
* \n indicates that no numerical value was found on the line.
*
* If the user wants to skip all leading white space including
* \n, \f, \v, \r, he should first call "skipwhite( f);"
*
* Peculiarity: This specifically forbids a leading '+' or '-'.
*/
int readxwd(unsigne d int *wd, FILE *f)
{
unsigned int value, digit;
int status;
int ch;

#define UWARNLVL (UINT_MAX / 10U)
#define UWARNDIG (UINT_MAX - UWARNLVL * 10U)

value = 0; /* default */
status = 1; /* default error */

ch = ignoreblks(f);

if (EOF == ch) status = EOF;
else if (isdigit(ch)) status = 0; /* digit, no error */

while (isdigit(ch)) {
digit = ch - '0';
if ((value UWARNLVL) ||
((UWARNLVL == value) && (digit UWARNDIG))) {
status = 1; /* overflow */
value -= UWARNLVL;
}
value = 10 * value + digit;
ch = getc(f);
} /* while (ch is a digit) */

*wd = value;
ungetc(ch, f);
return status;
} /* readxwd */

The #includes, skipwhite, and ignoreblks functions are omitted.

--
<http://www.cs.auckland .ac.nz/~pgut001/pubs/vista_cost.txt>
<http://www.securityfoc us.com/columnists/423>

"A man who is right every time is not likely to do very much."
-- Francis Crick, co-discover of DNA
"There is nothing more amazing than stupidity in action."
-- Thomas Matthews

**Malcolm McLean** · Feb 11 '07, 06:05 PM

Re: Requesting advice how to clean up C code for validating string represents integer

"robert maas, see http://tinyurl.com/uh3t" <rem642b@yahoo. comwrote

Now we come to C: I presently have a horrible mess:

"CookBook", sample programs for 4 steps past CGI Hello World

http://www.rawbw.com/~rem/HelloPlus/CookBook/h4s.html#h4intc

I'm thinking of pulling out all the character-case testing into a
function that converts a character into a class-number (such as 1
for space, 2 for digit, 3 for sign, etc.), calling that all over
the place, and the using a SELECT statement on the result, which
won't change the logic of the code but might make it tidier.
Alternately I might hand-code replacements for the Lisp/Java
utilities for scanning strings, or find something in one of the C
libraries that would help, and then translate the Lisp or Java code
to C. Do any of you have any other ideas what I might do to clean
up the C code? Don't write my code for me, but just give hints what
library routines might do 90% of the work for me, or suggest
re-design of the algorithm? One thing I don't want to do is
download a REGEX package for C. I'm trying to give examples of how
to do things from scratch in C, not how to simply use somebody
else's program, even if the source for the REGEX module is
available. If something isn't in the a standard library for C, then
it doesn't exist for the purpose of this project. (The only
exception I made is the module for collecting and decoding HTML
FORM contents, which is a prerequisite for this whole project.)
>

The first thing is to make your interface clean.

If you want to parse from a string, take a block out of strtol's book.

int parseint(char *str, char **end).

Return the integer you read, and the end of the input you pased up to. If
you cannot read an integer successfully, make *end equal str and return
INT_MIN. INT_MIN is much less lilely than 0 or -1 to be confused with a real
integer if you have a lazy caller who doesn't check his end pointer
properly.

skip leading whitespace.
Read the optional +/- character and make sure there aren't two of them.
skip whitepace ?
Read digit one by one into an usigned integer, amd multiply by ten if there
are more digits to come. Terminate if the unsigned overflows.
Check for INT_MAX or -INT_MIN if the negative flag is set. Terminate on
overflow.
Convert to a signed integer.
Your spec now says to skip trailing whitespace. Probably a bad idea, but if
the instructions say do it we must do it.
Set the end pointer to end of input on success, input on fail.
Return answer on success, INT_MIN on fail.

**robert maas, see http://tinyurl.com/uh3t** · Feb 11 '07, 07:25 PM

Re: Requesting advice how to clean up C code for validating string represents integer

From: Random832 <ran...@random. yi.org>

I'd use strtol with a base of 10.

Several people suggested that, but you made some additional
comments I want to reply to, so I'm responding here.

Things to consider:
1. It doesn't care if there's junk after the numbers, but why do you?

This is for processing a HTML FORM filled out by a user, a typical
user who is a total novice at computers yet is trying all sorts of
things found on the Web. If the form asks for an integer to be
entered, but the user enters something else, like two integers, or
an algebraic formula which just happens to start with an integer,
or a floating-point value or decimal fraction, or a fraction, I
don't want to just gobble the first part and ignore all the rest,
because obviously the luser didn't understand/follow instructions.
If I just process the first part and ignore the rest, the luser
will be totally confused why he/she didn't get the intended effect.
Better that I complain about the slightest mess in the input field.

You can always examine *endptr.

Per a nice example I found on the Web:
Linkname: Bullet Proof Integer Input Using strtol()
URL: http://home.att.net/~jackklein/c/code/strtol.html
I'm indeed now checking for any diagnostics that can be obtained
just from the results returned by strtol (the actual return value,
the global error flag, and the reference pointer endptr). See end
of this message for the code as I have it now.

2. Won't work for converting integers greater than eleventy billion or
however much your system supports. But how do you intend to convert
them otherwise?

Good point. My previous idea was for the user to get just the
syntax correct for integers, and then if the result is mangled it
obviously means this particular programming language (c, c++, java)
is using fixed-length binary integers, whereas if the result is
always correct no matter how many digits are given, then the
language (lisp) is using unlimited-precision integers. But if it's
easy to diagnose explicitly, such as provided by strtol, then
perhaps I can actually tell the user when overflow happens, to make
the lesson a bit less obscure.

Anyway, using strtol, with all the possible tests on the result:

All of these produce the correct diagnosis (note 15-char buffer for input):

Type a number:55555555 5555555555
You typed: [55555555555555]
Number out of range.

Type a number:21470000 00
Dropping EOL char from end of string.
You typed: [2147000000]
Looks good? N=2147000000

Type a number:21480000 00
Dropping EOL char from end of string.
You typed: [2148000000]
Number out of range.

Type a number:
Dropping EOL char from end of string.
You typed: []
No number given.

Type a number:5x
Dropping EOL char from end of string.
You typed: [5x]
After number, extra characters on input line.

But these are not the effects I want:

Type a number:x5
Dropping EOL char from end of string.
You typed: [x5]
No number given.

Type a number:- 5
Dropping EOL char from end of string.
You typed: [- 5]
No number given.

There *is* a number given in each case, just that there's junk
before the number in the first case, and gap between sign and
number in second case. It seems I'll need to manually scan from the
start of the field to the start of the number to distinguish these
patterns (brackets indicate optional):
[white] junk [white] sign [white] digits -- junk before start of number
[white] sign white digits -- gap between sign and number
[white] sign junk digits -- junk (or gap) between sign and number
[white] sign digits -- good
[white] digits -- good
strtol doesn't seem to be helping me diagnose the cruft before the number.

Listing of source code used for the above tests:

#include <stdio.h>
#include <errno.h>

#define MAXCH 15
/* Deliberately small buffer to test buffer-full condition */

main() {
char chars[MAXCH]; char* inres; /* Set by fgets */
size_t len; /* Set by strlen */
char onech;
char* endptr; long long_var; /* Set by strtol */
while (1) {
fpurge(stdin);
printf("\nType a number:");
inres = fgets(chars, MAXCH, stdin);
if (NULL==inres) {
printf("*** Got NULL back, which maybe means end-of-stream?\n");
break;
}
len = strlen(chars);
/* printf("Length of string = %d\n", len); */
if (0 >= len) {
printf("Horribl e: Input was 0 chars, not even EOL char, how??\n");
break;
}
onech = chars[len-1];
/* printf("The last character is [%c]\n", onech); */
if ('\n' == onech) {
printf("Droppin g EOL char from end of string.\n");
chars[len-1] = '\0';
}
printf("You typed: [%s]\n", inres, NULL, inres);
errno = 0;
long_var = strtol(chars, &endptr, 10);
if (ERANGE == errno) {
printf("Number out of range.\n");
} else if (endptr==chars) {
printf("No number given.\n");
} else if ('\0' != *endptr) {
printf("After number, extra characters on input line.\n");
} else {
printf("Looks good? N=%ld\n", long_var);
}
sleep(1);
}
}

**Flash Gordon** · Feb 11 '07, 11:15 PM

Re: Requesting advice how to clean up C code for validating stringrepresent s integer

robert maas, see http://tinyurl.com/uh3t wrote, On 11/02/07 19:13:

>From: Random832 <ran...@random. yi.org>
>I'd use strtol with a base of 10.

>
Several people suggested that, but you made some additional
comments I want to reply to, so I'm responding here.
>

>Things to consider:
>1. It doesn't care if there's junk after the numbers, but why do you?

Better that I complain about the slightest mess in the input field.

That the the correct attitude for handling user input.

> You can always examine *endptr.

>
Per a nice example I found on the Web:
Linkname: Bullet Proof Integer Input Using strtol()
URL: http://home.att.net/~jackklein/c/code/strtol.html
I'm indeed now checking for any diagnostics that can be obtained
just from the results returned by strtol (the actual return value,
the global error flag, and the reference pointer endptr). See end
of this message for the code as I have it now.

Jack Klein knows his stuff. You have found a good reference.

>2. Won't work for converting integers greater than eleventy billion or
> however much your system supports. But how do you intend to convert
> them otherwise?

>
Good point. My previous idea was for the user to get just the
syntax correct for integers, and then if the result is mangled it
obviously means this particular programming language (c, c++, java)
is using fixed-length binary integers, whereas if the result is
always correct no matter how many digits are given, then the
language (lisp) is using unlimited-precision integers.

With C and C++ assuming that bad input will lead to obviously bad output
is not in general a good idea since in far too many situations it will
produce something that is not obviously bad.

But if it's
easy to diagnose explicitly, such as provided by strtol, then
perhaps I can actually tell the user when overflow happens, to make
the lesson a bit less obscure.

OK, that's good.

<snip>

But these are not the effects I want:
>
Type a number:x5
Dropping EOL char from end of string.
You typed: [x5]
No number given.
>
Type a number:- 5
Dropping EOL char from end of string.
You typed: [- 5]
No number given.
>
There *is* a number given in each case, just that there's junk
before the number in the first case, and gap between sign and
number in second case. It seems I'll need to manually scan from the
start of the field to the start of the number to distinguish these
patterns (brackets indicate optional):
[white] junk [white] sign [white] digits -- junk before start of number
[white] sign white digits -- gap between sign and number
[white] sign junk digits -- junk (or gap) between sign and number

Yes, you need to check for the above yourself if you want to report
them. strtol will only indicate that it the first non-space character
was invalid, not whether there was something valid further in.

[white] sign digits -- good
[white] digits -- good

The above, of course, are indicated by strtol succeeding ;-)

strtol doesn't seem to be helping me diagnose the cruft before the number.
>
>
Listing of source code used for the above tests:
>
#include <stdio.h>
#include <errno.h>

#include <stdlib.h/* For strtol. Very important since otherwise the
compiler is *required* to assume it returns an int not a long. */

#define MAXCH 15
/* Deliberately small buffer to test buffer-full condition */
>
main() {

Since no one has mentioned it yet I will. The above, whilst legal in the
original C standard, is bad style and no longer supported in the
new(ish) C standard that might one day become commonly implemented.
Don't use implicit and if you don't want parameters be explicit about it.

int main(void) {

char chars[MAXCH]; char* inres; /* Set by fgets */
size_t len; /* Set by strlen */
char onech;
char* endptr; long long_var; /* Set by strtol */
while (1) {

I prefer 'for (;;)' but that is purely a matter of style.

fpurge(stdin);

Standard C does not have an "fpurge" function or anything similar to
what I am guessing it does.

printf("\nType a number:");

As per Jack's example you need to flush stdout (or have a \n at the end
of the above line). There is also an argument that using puts (which
outputs a newline after the specified text) or fputs would be better
since they do not scan the string for format specifiers.

inres = fgets(chars, MAXCH, stdin);

Since chars is an array rather than a pointer you could use:
inres = fgets(chars, sizeof chars, stdin);

if (NULL==inres) {
printf("*** Got NULL back, which maybe means end-of-stream?\n");

It is end of stream or an error.

break;
}
len = strlen(chars);
/* printf("Length of string = %d\n", len); */
if (0 >= len) {

len cannot be negative or even 0 here for at least three reasons. It is
of type size_t which is unsigned and also strlen returns a size_t. The
third reason is that fgets reads until it either has enough to fill the
buffer (allowing space for the nul termination), until error or end of
stream, or up to and including the newline, which ever comes first. So
given a buffer length of 2 or more it will *always* either return NULL
or it will have written a string with a strlen of at least 1. So this if
cannot be taken.

printf("Horribl e: Input was 0 chars, not even EOL char, how??\n");
break;
}
onech = chars[len-1];
/* printf("The last character is [%c]\n", onech); */
if ('\n' == onech) {
printf("Droppin g EOL char from end of string.\n");
chars[len-1] = '\0';
}

else {
report that the line entered was too long and then probably read the
rest of the line up to and including the next newline.
}

printf("You typed: [%s]\n", inres, NULL, inres);
errno = 0;
long_var = strtol(chars, &endptr, 10);
if (ERANGE == errno) {
printf("Number out of range.\n");
} else if (endptr==chars) {

At this point you could scan from the start of the string for the first
character that is not white space and report a different error depending
on what it is using the is* functions from ctype.h. Alternatively you
could look at using strspn or strcspn from string.h

printf("No number given.\n");
} else if ('\0' != *endptr) {
printf("After number, extra characters on input line.\n");
} else {
printf("Looks good? N=%ld\n", long_var);
}
sleep(1);

sleep is not a standard function and seems rather pointless in this program.

}
}

--
Flash Gordon

**robert maas, see http://tinyurl.com/uh3t** · Feb 12 '07, 04:55 AM

Re: Requesting advice how to clean up C code for validating string represents integer

From: Flash Gordon <s...@flash-gordon.me.uk>

sleep(1);

sleep is not a standard function and seems rather pointless in this program.

It's absolutely essential for peace of mind when dialed into a Unix
shell with VT100 emulator at 19200 baud. The first time I ran this
program, without the sleep call, and pressed ctrl-D to generate
end-of-stream on stdin, the program went into infinite read-EOS
spew-text loop, which filled up all modem buffers. I immediately
pressed ctrl-C to abort C program, and held it down for about ten
seconds, but it was too late, modem buffers were grossly full. I
then pressed ctrl-Z and held that down for several minutes, but
modem buffers were still spewing to the VT100 emulator. I then
scrolled to the top of the past-screens buffer to see if I could
save anything, but it was already too late, all the past-screens
buffer (appx. 30-40 full VT100 screensfull) had already been
overwritten by the spew. I then waited about ten minutes, watching
spew spew spew incessantly, with no way to know whether the program
had even seen my ctrl-C interrupt. Finally after ten minutes or so
I finally saw a shell prompt. I immediately put in the sleep before
any further work on the program. Now if it gets into an infinite
loop, I press ctrl-C and get instant response because there's no
ten minutes of spew already in the modem buffer.

I copied a few cleanup suggestions from your message and will be
responding about them later.

**Nick Keighley** · Feb 12 '07, 01:25 PM

Re: Requesting advice how to clean up C code for validating string represents integer

On 11 Feb, 06:57, rem6...@yahoo.c om (robert maas, see http://
tinyurl.com/uh3t) wrote:

<snip>

[the program]

verifies the text within a field to make sure it is a valid
representation of an integer, without any junk thrown in, i.e. it
must satisfy the regular expression: ^ *[-+]?[0-9]+ *$
>
If the contents of the field are wrong I want to diagnose as much
as reasonable what's wrong, not just say "syntax error".

<snip>

Alternately I might hand-code replacements for the Lisp/Java
utilities for scanning strings, or find something in one of the C
libraries that would help,

if it was anything other than a number then sscanf() might
be worth a look.

<snip>

--
Nick Keighley

**Flash Gordon** · Feb 12 '07, 10:06 PM

Re: Requesting advice how to clean up C code for validating stringrepresent s integer

robert maas, see http://tinyurl.com/uh3t wrote, On 12/02/07 04:48:

>From: Flash Gordon <s...@flash-gordon.me.uk>

>> sleep(1);

>sleep is not a standard function and seems rather pointless in this program.

>
It's absolutely essential for peace of mind when dialed into a Unix
shell with VT100 emulator at 19200 baud. The first time I ran this
program, without the sleep call, and pressed ctrl-D to generate
end-of-stream on stdin, the program went into infinite read-EOS
spew-text loop, which filled up all modem buffers. I immediately

<snip>

I can only suggest that you had some other bug in your program at that
point or a but in your modem. As presented your program would not do
that whether it detected an error or EOF it would break out of the loop
and terminate.

Having said that, I can see that if you are hitting that sort of problem
that a delay could be useful.

I copied a few cleanup suggestions from your message and will be
responding about them later.

OK.
--
Flash Gordon

**robert maas, see http://tinyurl.com/uh3t** · Feb 13 '07, 04:35 AM

Re: Requesting advice how to clean up C code for validating string represents integer

From: Flash Gordon <s...@flash-gordon.me.uk>

... The first time I ran this
program, without the sleep call, and pressed ctrl-D to generate
end-of-stream on stdin, the program went into infinite read-EOS
spew-text loop, which filled up all modem buffers. ...

I can only suggest that you had some other bug in your program at that
point or a but in your modem. As presented your program would not do
that whether it detected an error or EOF it would break out of the loop
and terminate.

Not a bug. It's just that the part of the program to detect EOF wasn't yet
written, and that's the very part I was trying to develop.
Step 1: Put in a printf to see what value comes back when I press ctrl-D.
Step 2: Write code to detect that value and break out of loop.
Step 3: Test that to see whether it works.
Step 4: Remove the printf.
Unfortunately step 1 blew me out for ten minutes or so without the sleep.

Unfortunately c doesn't allow any sleep times except integers. I
looked at nanosecond sleep but it requires loading a special module
and building a special nanosecond object and then loading a number
into that object before you can then pass that object to some OO
method that does the actual sleep, a royal pain if it's just to
prevent spew from filling up modem buffers on dialups. The amount
of time I'd waste learning how to do all that would be worse than
the amount of time I waste having a full one-second sleep at each
interactive I/O transaction in the loop during the development of
this code destinded for CGI where there's a completely different
logic for interactive transactions and no chance for spew hence no
need for the sleep.

Anyway, here's the latest news on my task:

While searching various clues the kind folks here sent me, I
discovered some library functions (strspn, strcspn) which are
useful for skipping across whole classes of characters or
complements of such classes, similar to the functions I implemented
in Java (explicitly) and in Common Lisp (via anonymous-function
parameters). That made it possible to translate my lisp/java
algorithms directly to c.

I decided to completely separate the code for checking general
integer syntax [white]* [sign]? [digit]+ [white]* (pseudo-regex
notation), which is independent of the programming language (except
Java where plus sign isn't allowed in integer literals or string to
parseInt), from the petty code to check whether the resultant value
is within the allowed range for this or that fixed-precision data
type in this or that programming language as implemented by this or
that vendor.

So I have one function, stringCheckInte ger, which checks whether
the string is of the appropriate general format, making liberal use
of strspn and strcspn, and another function, stringIntegerTe llRange,
which checks whether the string-number can be converted to an
actual number by strtoll, and if so then also checks whether it's
within ranges of the successively smaller integer data types. I
think this is my final c version for the time being.
If anyone is curious, see:
<http://www.rawbw.com/~rem/HelloPlus/CookBook/h4s.html#h4intc >
go to the second form ("re-write").

**Flash Gordon** · Feb 13 '07, 10:15 AM

Re: Requesting advice how to clean up C code for validating stringrepresent s integer

robert maas, see http://tinyurl.com/uh3t wrote, On 13/02/07 04:24:

>From: Flash Gordon <s...@flash-gordon.me.uk>

>>... The first time I ran this
>>program, without the sleep call, and pressed ctrl-D to generate
>>end-of-stream on stdin, the program went into infinite read-EOS
>>spew-text loop, which filled up all modem buffers. ...

>I can only suggest that you had some other bug in your program at that
>point or a but in your modem. As presented your program would not do
>that whether it detected an error or EOF it would break out of the loop
>and terminate.

>
Not a bug. It's just that the part of the program to detect EOF wasn't yet
written, and that's the very part I was trying to develop.

So it still was not needed in the program you posted.

Step 1: Put in a printf to see what value comes back when I press ctrl-D.
Step 2: Write code to detect that value and break out of loop.
Step 3: Test that to see whether it works.
Step 4: Remove the printf.
Unfortunately step 1 blew me out for ten minutes or so without the sleep.

That is because it is the wrong approach
1) read the documentation to see what the correct way to do it is
2) write the code
3) test it

Fewer steps and more likely to give you a reliable result.

If you used your method with "isspace" it might lead you to think it
returns 1 to indicate a space, then due to a library upgrade your code
could break because actually it returns any non-zero value for a space.

Unfortunately c doesn't allow any sleep times except integers. I

Wrong. C does not allow *any* sleeping. The slepp function is *not* part
of C it is part of something else your system provides and makes
accessible from C as an extension.

<snip>

think this is my final c version for the time being.
If anyone is curious, see:
<http://www.rawbw.com/~rem/HelloPlus/CookBook/h4s.html#h4intc >
go to the second form ("re-write").

I may or may not look later.
--
Flash Gordon

**Richard Heathfield** · Feb 13 '07, 10:45 AM

Re: Requesting advice how to clean up C code for validating string represents integer

Flash Gordon said:

robert maas, see http://tinyurl.com/uh3t wrote, On 13/02/07 04:24:

<snip>

>

>Unfortunatel y c doesn't allow any sleep times except integers. I

>
Wrong. C does not allow *any* sleeping.

Wrong. C does *allow* sleeping. It just doesn't *support* it.

The [sleep] function is *not* part of C

Arguable. It's not defined by the Standard, I agree. But what is a
language, if not the set of all sentences that can be formed according
to the rules of that language? It is certainly possible to call a
function named sleep(), within the rules of C.

Incidentally, I am not arguing that sleep() is topical.

--
Richard Heathfield
"Usenet is a strange place" - dmr 29/7/1999

http://www.cpax.org.uk

email: rjh at the above domain, - www.

**CBFalconer** · Feb 13 '07, 11:35 AM

Re: Requesting advice how to clean up C code for validating stringrepresent s integer

"robert maas, see http://tinyurl.com/uh3t" wrote:

>

.... snip ...

>
Not a bug. It's just that the part of the program to detect EOF
wasn't yet written, and that's the very part I was trying to
develop.
Step 1: Put in a printf to see what value comes back when I press
ctrl-D.

What for? You have a macro called EOF available. Use it.

--
<http://www.cs.auckland .ac.nz/~pgut001/pubs/vista_cost.txt>
<http://www.securityfoc us.com/columnists/423>

"A man who is right every time is not likely to do very much."
-- Francis Crick, co-discover of DNA
"There is nothing more amazing than stupidity in action."
-- Thomas Matthews

Requesting advice how to clean up C code for validating string represents integer

Requesting advice how to clean up C code for validating string represents integer

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment