I Will Pay For Help On Http.conf

**roaringbiz** · Oct 15 '08, 10:11 PM

ok i got the virtual hosts working with my dns server.. www.mnemonicrom .com shows up no problem.. so does www.roaring.biz :8000 which is also html

the problem is my main website is all .php code.. including the index which is .php... these are not showing up at all... i am getting a page not found error every time i try to access it from 70.25.54.93 or the main domain name www.roaring.biz ...

it works on localhost no problem and the private address of 192.168.2.2 no problem. it's just completely locked out of the internet world.. no one can access it.. can anyone help? I'm depserate.. my site has been down for over a week now.

**roaringbiz** · Oct 15 '08, 10:56 PM

why does this http.conf only display html code and not php... my site can not run without index.php as well as the other .php files running... can you look at it and tell me what i am doing wrong?

# IndigoPerl changes are marked with: ISEXT

#
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.or g/docs/2.2> for detailed information.
# In particular, see
# <URL:http://httpd.apache.or g/docs/2.2/mod/directives.html >
# for a discussion of each configuration directive.
#
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
#
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "D:/APACHE/apache" will be interpreted by the
# server as "D:/APACHE/apache/logs/foo.log".
#
# NOTE: Where filenames are specified, you must use forward slashes
# instead of backslashes (e.g., "c:/apache" instead of "c:\apache" ).
# If a drive letter is omitted, the drive on which Apache.exe is located
# will be used by default. It is recommended that you always supply
# an explicit drive letter in absolute paths to avoid confusion.

#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to point the LockFile directive
# at a local disk. If you wish to share the same ServerRoot for multiple
# httpd daemons, you will need to change at least LockFile and PidFile.
#
ServerRoot "D:/APACHE/apache"

#
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
#
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#
#Listen W:/dev/indigoperl/indigoperl2.34. 56.78:80
Listen 80

#
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
#
# Example:
# LoadModule foo_module modules/mod_foo.so
#
LoadModule actions_module modules/mod_actions.so
LoadModule alias_module modules/mod_alias.so
LoadModule asis_module modules/mod_asis.so
LoadModule auth_basic_modu le modules/mod_auth_basic. so
#LoadModule auth_digest_mod ule modules/mod_auth_digest .so
#LoadModule authn_alias_mod ule modules/mod_authn_alias .so
#LoadModule authn_anon_modu le modules/mod_authn_anon. so
#LoadModule authn_dbd_modul e modules/mod_authn_dbd.s o
#LoadModule authn_dbm_modul e modules/mod_authn_dbm.s o
LoadModule authn_default_m odule modules/mod_authn_defau lt.so
LoadModule authn_file_modu le modules/mod_authn_file. so
#LoadModule authnz_ldap_mod ule modules/mod_authnz_ldap .so
#LoadModule authz_dbm_modul e modules/mod_authz_dbm.s o
LoadModule authz_default_m odule modules/mod_authz_defau lt.so
LoadModule authz_groupfile _module modules/mod_authz_group file.so
LoadModule authz_host_modu le modules/mod_authz_host. so
#LoadModule authz_owner_mod ule modules/mod_authz_owner .so
LoadModule authz_user_modu le modules/mod_authz_user. so
LoadModule autoindex_modul e modules/mod_autoindex.s o
#LoadModule cache_module modules/mod_cache.so
#LoadModule cern_meta_modul e modules/mod_cern_meta.s o
LoadModule cgi_module modules/mod_cgi.so
#LoadModule charset_lite_mo dule modules/mod_charset_lit e.so
#LoadModule dav_module modules/mod_dav.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
#LoadModule dav_lock_module modules/mod_dav_lock.so
#LoadModule dbd_module modules/mod_dbd.so
#LoadModule deflate_module modules/mod_deflate.so
LoadModule dir_module modules/mod_dir.so
#LoadModule disk_cache_modu le modules/mod_disk_cache. so
#LoadModule dumpio_module modules/mod_dumpio.so
LoadModule env_module modules/mod_env.so
#LoadModule expires_module modules/mod_expires.so
#LoadModule ext_filter_modu le modules/mod_ext_filter. so
#LoadModule file_cache_modu le modules/mod_file_cache. so
#LoadModule filter_module modules/mod_filter.so
#LoadModule headers_module modules/mod_headers.so
#LoadModule ident_module modules/mod_ident.so
#LoadModule imagemap_module modules/mod_imagemap.so
LoadModule include_module modules/mod_include.so
#LoadModule info_module modules/mod_info.so
LoadModule isapi_module modules/mod_isapi.so
#LoadModule ldap_module modules/mod_ldap.so
#LoadModule logio_module modules/mod_logio.so
LoadModule log_config_modu le modules/mod_log_config. so
#LoadModule log_forensic_mo dule modules/mod_log_forensi c.so
#LoadModule mem_cache_modul e modules/mod_mem_cache.s o
LoadModule mime_module modules/mod_mime.so
#LoadModule mime_magic_modu le modules/mod_mime_magic. so
LoadModule negotiation_mod ule modules/mod_negotiation .so
#LoadModule proxy_module modules/mod_proxy.so
#LoadModule proxy_ajp_modul e modules/mod_proxy_ajp.s o
#LoadModule proxy_balancer_ module modules/mod_proxy_balan cer.so
#LoadModule proxy_connect_m odule modules/mod_proxy_conne ct.so
#LoadModule proxy_ftp_modul e modules/mod_proxy_ftp.s o
#LoadModule proxy_http_modu le modules/mod_proxy_http. so
LoadModule rewrite_module modules/mod_rewrite.so
LoadModule setenvif_module modules/mod_setenvif.so
#LoadModule speling_module modules/mod_speling.so
#LoadModule ssl_module modules/mod_ssl.so
#LoadModule status_module modules/mod_status.so
#LoadModule substitute_modu le modules/mod_substitute. so
#LoadModule unique_id_modul e modules/mod_unique_id.s o
#LoadModule userdir_module modules/mod_userdir.so
#LoadModule usertrack_modul e modules/mod_usertrack.s o
#LoadModule version_module modules/mod_version.so
LoadModule vhost_alias_mod ule modules/mod_vhost_alias .so

<IfModule !mpm_netware_mo dule>
<IfModule !mpm_winnt_modu le>
#
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
#
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
#
User daemon
Group daemon

</IfModule>
</IfModule>

# 'Main' server configuration
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
#
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#

#
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. admin@your-domain.com
#
ServerAdmin webmaster@roari ng.biz

# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
#
# If your host doesn't have a registered DNS name, enter its IP address here.
#
#ServerName 192.168.2.2:80

#
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
#
DocumentRoot "D:/APACHE/apache/htdocs"

#
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories) .
#
# First, we configure the "default" to be a very restrictive set of
# features.
#
<Directory "D:/APACHE/apache/htdocs">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>

#
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
#

#
# This should be changed to whatever you set DocumentRoot to.
#
<Directory "D:/APACHE/apache/htdocs">
#
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwner Match ExecCGI MultiViews
#
# Note that "MultiViews " must be named *explicitly* --- "Options All"
# doesn't give it to you.
#
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs/2.2/mod/core.html#options
# for more information.
#
Options Indexes FollowSymLinks
# Options Indexes FollowSymLinks MultiViews ExecCGI +Includes

#
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# Options FileInfo AuthConfig Limit
#
AllowOverride None

#
# Controls who can get stuff from this server.
#
Order allow,deny
Allow from all

</Directory>

#
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
#
<IfModule dir_module>
DirectoryIndex index.html index.html.var index.htm index.php
</IfModule>

#
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
#
<FilesMatch "^\.ht">
Order allow,deny
Deny from all
Satisfy All
</FilesMatch>

#
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog "logs/error.log"

#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn

<IfModule log_config_modu le>
#
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
#
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer} i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common

<IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer} i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>

#
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
#
CustomLog "logs/access.log" common

#
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#
#CustomLog "logs/access.log" combined
</IfModule>

<IfModule alias_module>
#
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://roadhog.localhost/bar

#
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
#
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path.

#
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
#
ScriptAlias /cgi-bin/ "D:/APACHE/apache/cgi-bin/"

</IfModule>

<IfModule cgid_module>
#
# ScriptSock: On threaded servers, designate the path to the UNIX
# socket used to communicate with the CGI daemon of mod_cgid.
#
#Scriptsock logs/cgisock
</IfModule>

#
# "D:/APACHE/apache/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
#
<Directory "D:/APACHE/apache/cgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>

#
# DefaultType: the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "applicatio n/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
#
DefaultType text/plain

<IfModule mime_module>
#
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
#
TypesConfig conf/mime.types

#
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#
#AddType application/x-gzip .tgz
#
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
#
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
#
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz

#
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
#
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#
#AddHandler cgi-script .cgi

# For type maps (negotiated resources):
#AddHandler type-map var

#
# Filters allow you to process content before it is sent to the client.
#
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#
#AddType text/html .shtml
#AddOutputFilte r INCLUDES .shtml
</IfModule>

#
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#
#MIMEMagicFile conf/magic

#
# Customizable error responses come in three flavors:
# W:/dev/indigoperl/indigoperl) plain text 2) local redirects 3) external redirects
#
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler .pl"
#ErrorDocument 402 http://roadhog.localhost/subscription_info.html
#

#
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall is used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
#
#EnableMMAP off
#EnableSendfile off

# Supplemental configuration
#
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.

# Server-pool management (MPM specific)
#Include conf/extra/httpd-mpm.conf

# Multi-language error messages
#Include conf/extra/httpd-multilang-errordoc.conf

# Fancy directory listings
#Include conf/extra/httpd-autoindex.conf

# Language settings
#Include conf/extra/httpd-languages.conf

# User home directories
#Include conf/extra/httpd-userdir.conf

# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf

# Virtual hosts
#Include conf/extra/httpd-vhosts.conf

# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf

# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf

# Various default settings
#Include conf/extra/httpd-default.conf

# Secure (SSL/TLS) connections
#Include conf/extra/httpd-ssl.conf
#
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
#
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>

#ISEXT BEGIN INDIOPERL MODIFICATIIONS

Alias /apache_docs "D:/APACHE/apache/manual"
Alias /perl_docs "D:/APACHE/perl/html"

# ISEXT allow execution of scripts in the root directory
AddHandler cgi-script .pl
AddHandler cgi-script .cgi

<Directory "D:/APACHE/php">
# NEED THIS to ALLOW PHP TO RUN
Allow from all
</Directory>

<Directory "D:/APACHE/apache/htdocs">
Options Indexes FollowSymLinks MultiViews ExecCGI +Includes
</Directory>

# BEGIN MOD_PERL CONFIG
#LoadModule perl_module modules/mod_perl.so
LoadModule perl_module ../perl/bin/mod_perl.so
ScriptAlias /perl-bin/ "D:/APACHE/apache/perl-bin/"
PerlSendHeader On
<Location /perl-bin>
SetHandler perl-script
PerlHandler ModPerl::Regist ry
Options ExecCGI
</Location>
# END MOD_PERL CONFIG

# ENABLE SSL CONNECTIONS
LoadModule ssl_module modules/mod_ssl.so
Include conf/extra/httpd-ssl.conf

#ISEXT END INDIOPERL MODIFICATIIONS

#BEGIN PHP INSTALLER EDITS - REMOVE ONLY ON UNINSTALL
ScriptAlias /php/ "d:/APACHE/php/"
PHPIniDir "D:/APACHE/php/"
LoadModule php5_module "D:/APACHE/php/php5apache2_2.d ll"
#END PHP INSTALLER EDITS - REMOVE ONLY ON UNINSTALL

## VIRTUAL HOSTS ##
NameVirtualHost 192.168.2.2

#
# VirtualHost example:
# Almost any Apache directive may go into a VirtualHost container.
# The first VirtualHost section is used for requests without a known
# server name.
#
#<VirtualHost *>
# ServerAdmin webmaster@dummy-host.example.co m
# DocumentRoot /www/docs/dummy-host.example.co m
# ServerName dummy-host.example.co m
# ErrorLog logs/dummy-host.example.co m-error_log
# CustomLog logs/dummy-host.example.co m-access_log
#</VirtualHost>
############### ############### ############### ############### ##############
############### ############### ############### ############### ##############
############### ############### ############### ############### ##############
############### ############### ############### ############### ##############
############### ############### ############### ############### ##############
############### ############### ############### ############### ##############
############### ############### ############### ############### ##############
########### ROARING.BIZ WEBSITE######## ####### NEVER EXPIRES
<virtualHost 192.168.2.2>
ServerName www.roaring.biz
ServerAlias roaring.biz
ServerAdmin roaringbiz@hotm ail.com
DocumentRoot d:/APACHE/apache/HTDOCS
VirtualScriptAl ias d:/APACHE/apache/CGI-BIN
ServerSignature EMail

</VirtualHost>
########### MNEMONICROM.COM WEBSITE######## ####### NEVER EXPIRES (WEBHOSTING)
<virtualHost 192.168.2.2>
ServerName www.mnemonicrom.com
ServerAlias mnemonicrom.com
ServerAdmin roaringbiz@hotm ail.com
DocumentRoot d:/APACHE/apache/WEBSITES/mnemonicrom.com/HTDOCS
VirtualScriptAl ias d:/APACHE/apache/WEBSITES/mnemonicrom.com/CGI-BIN
ServerSignature EMail
</VirtualHost>

**numberwhun** · Oct 15 '08, 11:29 PM

To get this working, you may want to search Google (which is your friend) and find an Apache - PHP Configuration guide.

From what I can see, your httpd.conf only has a scriptAlias pointing to d:/Apache/PHP/. Is that where you put your PHP scripts? That is not where your initial index page is loaded from. It is loaded from your DocumentRoot.

You should read through the link I provided above or one like it. It will help you get the right stuff into your httpd. It has to be able to support .php files in the DocumentRoot to serve them automatically.

Regards,

Jeff

**roaringbiz** · Oct 16 '08, 12:36 PM

I did everything on that config page.. all it did was pull script up everytime i tried to access www.roaring.biz .. I set the one scriptalias to point to the server .php script files (d:/apache/apache/htdocs) and it did nothing as well.. I even went as far as going to the makers of my php script and they worked on it most of the early morning with no luck at all... I and other are completely stuck on this problem.. can somebody in the name of gawd please help get my site up and running!!! here's the script edited by dolphin

php is in d:/apche/php/
.php script files in d:/apache/apache/htdocs

# IndigoPerl changes are marked with: ISEXT

#
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.or g/docs/2.2> for detailed information.
# In particular, see
# <URL:http://httpd.apache.or g/docs/2.2/mod/directives.html >
# for a discussion of each configuration directive.
#
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
#
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "D:/APACHE/apache" will be interpreted by the
# server as "D:/APACHE/apache/logs/foo.log".
#
# NOTE: Where filenames are specified, you must use forward slashes
# instead of backslashes (e.g., "c:/apache" instead of "c:\apache" ).
# If a drive letter is omitted, the drive on which Apache.exe is located
# will be used by default. It is recommended that you always supply
# an explicit drive letter in absolute paths to avoid confusion.

#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to point the LockFile directive
# at a local disk. If you wish to share the same ServerRoot for multiple
# httpd daemons, you will need to change at least LockFile and PidFile.
#
ServerRoot "D:/APACHE/apache"

#
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
#
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#
#Listen W:/dev/indigoperl/indigoperl2.34. 56.78:80
Listen 80

#
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
#
# Example:
# LoadModule foo_module modules/mod_foo.so
#
LoadModule actions_module modules/mod_actions.so
LoadModule alias_module modules/mod_alias.so
LoadModule asis_module modules/mod_asis.so
LoadModule auth_basic_modu le modules/mod_auth_basic. so
#LoadModule auth_digest_mod ule modules/mod_auth_digest .so
#LoadModule authn_alias_mod ule modules/mod_authn_alias .so
#LoadModule authn_anon_modu le modules/mod_authn_anon. so
#LoadModule authn_dbd_modul e modules/mod_authn_dbd.s o
#LoadModule authn_dbm_modul e modules/mod_authn_dbm.s o
LoadModule authn_default_m odule modules/mod_authn_defau lt.so
LoadModule authn_file_modu le modules/mod_authn_file. so
#LoadModule authnz_ldap_mod ule modules/mod_authnz_ldap .so
#LoadModule authz_dbm_modul e modules/mod_authz_dbm.s o
LoadModule authz_default_m odule modules/mod_authz_defau lt.so
LoadModule authz_groupfile _module modules/mod_authz_group file.so
LoadModule authz_host_modu le modules/mod_authz_host. so
#LoadModule authz_owner_mod ule modules/mod_authz_owner .so
LoadModule authz_user_modu le modules/mod_authz_user. so
LoadModule autoindex_modul e modules/mod_autoindex.s o
#LoadModule cache_module modules/mod_cache.so
#LoadModule cern_meta_modul e modules/mod_cern_meta.s o
LoadModule cgi_module modules/mod_cgi.so
#LoadModule charset_lite_mo dule modules/mod_charset_lit e.so
#LoadModule dav_module modules/mod_dav.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
#LoadModule dav_lock_module modules/mod_dav_lock.so
#LoadModule dbd_module modules/mod_dbd.so
#LoadModule deflate_module modules/mod_deflate.so
LoadModule dir_module modules/mod_dir.so
#LoadModule disk_cache_modu le modules/mod_disk_cache. so
#LoadModule dumpio_module modules/mod_dumpio.so
LoadModule env_module modules/mod_env.so
#LoadModule expires_module modules/mod_expires.so
#LoadModule ext_filter_modu le modules/mod_ext_filter. so
#LoadModule file_cache_modu le modules/mod_file_cache. so
#LoadModule filter_module modules/mod_filter.so
#LoadModule headers_module modules/mod_headers.so
#LoadModule ident_module modules/mod_ident.so
#LoadModule imagemap_module modules/mod_imagemap.so
LoadModule include_module modules/mod_include.so
#LoadModule info_module modules/mod_info.so
LoadModule isapi_module modules/mod_isapi.so
#LoadModule ldap_module modules/mod_ldap.so
#LoadModule logio_module modules/mod_logio.so
LoadModule log_config_modu le modules/mod_log_config. so
#LoadModule log_forensic_mo dule modules/mod_log_forensi c.so
#LoadModule mem_cache_modul e modules/mod_mem_cache.s o
LoadModule mime_module modules/mod_mime.so
#LoadModule mime_magic_modu le modules/mod_mime_magic. so
LoadModule negotiation_mod ule modules/mod_negotiation .so
#LoadModule proxy_module modules/mod_proxy.so
#LoadModule proxy_ajp_modul e modules/mod_proxy_ajp.s o
#LoadModule proxy_balancer_ module modules/mod_proxy_balan cer.so
#LoadModule proxy_connect_m odule modules/mod_proxy_conne ct.so
#LoadModule proxy_ftp_modul e modules/mod_proxy_ftp.s o
#LoadModule proxy_http_modu le modules/mod_proxy_http. so
LoadModule rewrite_module modules/mod_rewrite.so
LoadModule setenvif_module modules/mod_setenvif.so
#LoadModule speling_module modules/mod_speling.so
#LoadModule ssl_module modules/mod_ssl.so
#LoadModule status_module modules/mod_status.so
#LoadModule substitute_modu le modules/mod_substitute. so
#LoadModule unique_id_modul e modules/mod_unique_id.s o
#LoadModule userdir_module modules/mod_userdir.so
#LoadModule usertrack_modul e modules/mod_usertrack.s o
#LoadModule version_module modules/mod_version.so
LoadModule vhost_alias_mod ule modules/mod_vhost_alias .so

<IfModule !mpm_netware_mo dule>
<IfModule !mpm_winnt_modu le>
#
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
#
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
#
User daemon
Group daemon

</IfModule>
</IfModule>

# 'Main' server configuration
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
#
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#

#
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. admin@your-domain.com
#
ServerAdmin webmaster@roari ng.biz

# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
#
# If your host doesn't have a registered DNS name, enter its IP address here.
#
#ServerName 192.168.2.2:80

#
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
#
DocumentRoot "D:/APACHE/apache/htdocs"

#
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories) .
#
# First, we configure the "default" to be a very restrictive set of
# features.
#
<Directory "D:/APACHE/apache/htdocs">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>

#
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
#

#
# This should be changed to whatever you set DocumentRoot to.
#
<Directory "D:/APACHE/apache/htdocs">
#
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwner Match ExecCGI MultiViews
#
# Note that "MultiViews " must be named *explicitly* --- "Options All"
# doesn't give it to you.
#
# The Options directive is both complicated and important. Please see
# http://httpd.apache.or g/docs/2.2/mod/core.html#optio ns
# for more information.
#
Options Indexes FollowSymLinks
# Options Indexes FollowSymLinks MultiViews ExecCGI +Includes

#
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# Options FileInfo AuthConfig Limit
#
AllowOverride None

#
# Controls who can get stuff from this server.
#
Order allow,deny
Allow from all

</Directory>

#
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
#
<IfModule dir_module>
DirectoryIndex index.html index.html.var index.htm index.php
</IfModule>

#
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
#
<FilesMatch "^\.ht">
Order allow,deny
Deny from all
Satisfy All
</FilesMatch>

#
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog "logs/error.log"

#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn

<IfModule log_config_modu le>
#
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
#
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer} i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common

<IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer} i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>

#
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
#
CustomLog "logs/access.log" common

#
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#
#CustomLog "logs/access.log" combined
</IfModule>

<IfModule alias_module>
#
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://roadhog.localho st/bar

#
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
#
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path.

#
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
#
ScriptAlias /cgi-bin/ "D:/APACHE/apache/cgi-bin/"

</IfModule>

<IfModule cgid_module>
#
# ScriptSock: On threaded servers, designate the path to the UNIX
# socket used to communicate with the CGI daemon of mod_cgid.
#
#Scriptsock logs/cgisock
</IfModule>

#
# "D:/APACHE/apache/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
#
<Directory "D:/APACHE/apache/cgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>

#
# DefaultType: the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "applicatio n/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
#
DefaultType text/plain

<IfModule mime_module>
#
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
#
TypesConfig conf/mime.types

#
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#
#AddType application/x-gzip .tgz
#
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
#
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
#
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz

#
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
#
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#
#AddHandler cgi-script .cgi

# For type maps (negotiated resources):
#AddHandler type-map var

#
# Filters allow you to process content before it is sent to the client.
#
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#
#AddType text/html .shtml
#AddOutputFilte r INCLUDES .shtml
</IfModule>

#
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#
#MIMEMagicFile conf/magic

#
# Customizable error responses come in three flavors:
# W:/dev/indigoperl/indigoperl) plain text 2) local redirects 3) external redirects
#
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler .pl"
#ErrorDocument 402 http://roadhog.localho st/subscription_in fo.html
#

#
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall is used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
#
#EnableMMAP off
#EnableSendfile off

# Supplemental configuration
#
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.

# Server-pool management (MPM specific)
#Include conf/extra/httpd-mpm.conf

# Multi-language error messages
#Include conf/extra/httpd-multilang-errordoc.conf

# Fancy directory listings
#Include conf/extra/httpd-autoindex.conf

# Language settings
#Include conf/extra/httpd-languages.conf

# User home directories
#Include conf/extra/httpd-userdir.conf

# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf

# Virtual hosts
#Include conf/extra/httpd-vhosts.conf

# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf

# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf

# Various default settings
#Include conf/extra/httpd-default.conf

# Secure (SSL/TLS) connections
#Include conf/extra/httpd-ssl.conf
#
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
#
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>

#ISEXT BEGIN INDIOPERL MODIFICATIIONS

Alias /apache_docs "D:/APACHE/apache/manual"
Alias /perl_docs "D:/APACHE/perl/html"

# ISEXT allow execution of scripts in the root directory
AddHandler cgi-script .pl
AddHandler cgi-script .cgi

<Directory "D:/APACHE/php/">
# NEED THIS to ALLOW PHP TO RUN
Allow from all
</Directory>

<Directory "D:/APACHE/apache/htdocs/">
Options Indexes FollowSymLinks MultiViews ExecCGI +Includes
</Directory>

# BEGIN MOD_PERL CONFIG
#LoadModule perl_module modules/mod_perl.so
LoadModule perl_module ../perl/bin/mod_perl.so
ScriptAlias /perl-bin/ "D:/APACHE/apache/perl-bin/"
PerlSendHeader On
<Location /perl-bin>
SetHandler perl-script
PerlHandler ModPerl::Regist ry
Options ExecCGI
</Location>
# END MOD_PERL CONFIG

# ENABLE SSL CONNECTIONS
LoadModule ssl_module modules/mod_ssl.so
Include conf/extra/httpd-ssl.conf

#ISEXT END INDIOPERL MODIFICATIIONS

#BEGIN PHP INSTALLER EDITS - REMOVE ONLY ON UNINSTALL
#ScriptAlias /php/ "d:/APACHE/php/"
ScriptAlias /php/ "d:/APACHE/apache/htdocs/"
PHPIniDir "D:/APACHE/php/"
LoadModule php5_module "D:/APACHE/php/php5apache2_2.d ll"
#addhandler php-5script php
#addtype text/html php
#addtype application/x-httpd-php-source phps

#END PHP INSTALLER EDITS - REMOVE ONLY ON UNINSTALL

#
# AddIcon* directives tell the server which icon to show for different
# files or filename extensions. These are only displayed for
# FancyIndexed directories.
#
AddIconByEncodi ng (CMP,/icons/compressed.gif) x-compress x-gzip

AddIconByType (TXT,/icons/text.gif) text/*
AddIconByType (IMG,/icons/image2.gif) image/*
AddIconByType (SND,/icons/sound2.gif) audio/*
AddIconByType (VID,/icons/movie.gif) video/*

AddIcon /icons/binary.gif .bin .exe
AddIcon /icons/binhex.gif .hqx
AddIcon /icons/tar.gif .tar
AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
AddIcon /icons/a.gif .ps .ai .eps
AddIcon /icons/layout.gif .html .shtml .htm .pdf .php
AddIcon /icons/text.gif .txt
AddIcon /icons/c.gif .c
AddIcon /icons/p.gif .pl .py
AddIcon /icons/f.gif .for
AddIcon /icons/dvi.gif .dvi
AddIcon /icons/uuencoded.gif .uu
AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
AddIcon /icons/tex.gif .tex
AddIcon /icons/bomb.gif core

AddIcon /icons/back.gif ..
AddIcon /icons/hand.right.gif README
AddIcon /icons/folder.gif ^^DIRECTORY^^
AddIcon /icons/blank.gif ^^BLANKICON^^

#
# DefaultIcon is which icon to show for files which do not have an icon
# explicitly set.
#
DefaultIcon /icons/unknown.gif

## BEGIN PHP CONFIG
#LoadModule php5_module "d:/APACHE/php/php5apache.dll"
#AddModule MOD_PHP5.C
Action application/x-httpd-php "d:/APACHE/php/php-cgi.exe"
SetEnv PHPRC d:/APACHE/php/

#AddType application/x-httpd-php .php
#PHPIniDir "d:/APACHE/php"

## VIRTUAL HOSTS ##
NameVirtualHost 70.25.54.93
# NameVirtualHost 192.168.2.2

#
# VirtualHost example:
# Almost any Apache directive may go into a VirtualHost container.
# The first VirtualHost section is used for requests without a known
# server name.
#
#<VirtualHost *>
# ServerAdmin webmaster@dummy-host.example.co m
# DocumentRoot /www/docs/dummy-host.example.co m
# ServerName dummy-host.example.co m
# ErrorLog logs/dummy-host.example.co m-error_log
# CustomLog logs/dummy-host.example.co m-access_log
#</VirtualHost>
############### ############### ############### ############### ##############
############### ############### ############### ############### ##############
############### ############### ############### ############### ##############
############### ############### ############### ############### ##############
############### ############### ############### ############### ##############
############### ############### ############### ############### ##############
############### ############### ############### ############### ##############

########### ROARING.BIZ WEBSITE######## ####### NEVER EXPIRES
<VirtualHost 70.25.54.93:80>
ServerName www.roaring.biz
ServerAlias roaring.biz
ServerAdmin roaringbiz@hotm ail.com
DocumentRoot d:/APACHE/apache/htdocs
VirtualScriptAl ias d:/APACHE/apache/CGI-BIN
ServerSignature EMail
</VirtualHost>

########### MNEMONICROM.COM WEBSITE######## ####### NEVER EXPIRES (WEBHOSTING)
#<virtualHost 192.168.2.2>
# ServerName www.mnemonicrom .com
# ServerAlias mnemonicrom.com
# ServerAdmin roaringbiz@hotm ail.com
# DocumentRoot d:/APACHE/apache/WEBSITES/mnemonicrom.com/HTDOCS
# VirtualScriptAl ias d:/APACHE/apache/WEBSITES/mnemonicrom.com/CGI-BIN
# ServerSignature EMail
#</VirtualHost>

I hope somebody solves this problem so I can get back up

**numberwhun** · Oct 16 '08, 03:34 PM

Personally, I have no experience with IndigoPerl. I looked at their site documentation though, and it says it comes pre-configured for php with apache, so its kind of odd that its not working for you.

Hopefully someone will have an answer for you.

Regards,

Jeff

I Will Pay For Help On Http.conf

I Will Pay For Help On Http.conf

Comment

Comment

Comment

Comment

Comment