php-4.3.4-Win + Apache2 + XP

Collapse
This topic is closed.
X
X
 
  • Time
  • Show
Clear All
new posts
  • Ad Astra

    #1

    php-4.3.4-Win + Apache2 + XP

    I am completely new to PHP and am finding installation the most
    difficult part to understand and implement. Could someone please
    review the rather long missive below and assist me? I have provided
    it in as clear a fashion as possible.


    COMPONENTS

    * Windows XP (Home) [Version 2002/Service Pack 1 installed]
    * Apache2 server [Version 2.0.48] (successfully installed; located as
    shown in the tree below)
    * php-4.3.4-Win (unzipped; located as shown in the tree below)
    * mySQL 4.0.17 (unzipped; located as shown in the tree below)


    FACTS

    I am doing a manual(server module, not CGI) install of PHP. I intend
    to undertake the installation of mySQL after PHP is successfully
    installed.

    I have put DLLs in various places (overkill, I know) so that they "can
    be found," a requirement spoken of in the PHP install.txt file. [The
    thing that will be doing the finding has not been identified in the
    PHP install.txt file. Is it the Apache2 server? the PHP program?
    both? something else?] I would like to have the DLLs only where they
    need to be, and to be able to remove them from the places they don't
    need to be.

    The key DLLs and EXE mentioned in the PHP install.txt file are:
    php4ts.dll
    php4apache.dll
    php.exe

    On my system,
    RUN: %SYSTEMROOT%
    yields
    C:\WINDOWS

    I have relabeled
    php.ini-dist
    as
    php.ini
    and copied it to various locations (see the tree below).

    When I did the Apache2 install,
    the installation program itself placed Apache2 in the
    C:\Program Files\Apache Group directory,
    a directory it created as part of the installation
    and which appears at the same level as my
    C:\WINDOWS (system root) directory.

    My preference is to have all three programs--the Apache2 server, PHP,
    and mySQL--conveniently accessible via my Program Files directory,
    from where I launch numerous other programs as well.

    Regarding the type of installation I am doing (in Windows XP), Julie
    Meloni, in her new book PHP ESSENTIALS (Second Edition), instructs as
    follows:
    "1. In the PHP installation directory, find the php.ini-dist file
    and rename it php.ini."
    [I did this.]
    "2. Move the php.ini file to C:\WINDOWS\ or wherever you usually
    put your *.ini files."
    [Actually, I don't "usually put my *.ini files"--this is the first
    time ever. So I winged it and first put the php.ini file in
    C:\WINDOWS\ as an obvious first choice; and then, later (after the
    installation did not succeed), I copied it to various other locations,
    as mentioned above and shown in the tree below.]
    "3. Move the php4ts.dll file to C:\WINDOWS\SYST EM\ or wherever
    you usually put your *.dll files."
    [In my system, under C:\WINDOWS\ are two similarly named folders,
    system\
    and
    system32\.
    Taking no chances, I copied the php.ini file to both places. Later, I
    placed it in the other locations shown, as well, knowing this was
    probably neither necessary nor well conceived.]

    Concurrently, I referred to the information in the PHP install.txt
    file, which confirmed Julie Meloni's Step 1.

    The choice of directory for Step 2, based on the PHP install.txt file,
    was concluded to be C:\WINDOWS\ (the equivalent of %SYSTEMROOT%, based
    on the RUN test I performed, as noted above). The information in the
    PHP install.txt file tells me that the %SYSTEMROOT% directory
    (C:\WINDOWS\, according to my test) is "typically: c:\winnt or
    c:\winnt40 for NT/2000/XP servers". This appears not to be true for
    XP; I have concluded this after spending some time looking for the
    winnt and winnt40 directories without success.

    In the Apache2 configuration file
    I did the careful inclusion of the uncommented line

    LoadModule php4_module c:/php-4.3.4-Win/sapi/php4apache2.dll

    at the very end of the section that starts

    # Example:
    # LoadModule foo_module modules/mod_foo.so
    #

    and lists numerous LoadModule items.

    In the Apache2 configuration file
    I also did the careful inclusion of the uncommented lines

    AddType application/x-httpd-php .php
    AddType application/x-httpd-php .html

    at the very end of the section that starts

    # AddType allows you to add or override the MIME configuration
    # file mime.types for specific file types.

    I saved the file and closed it.
    I started Apache.
    I stopped Apache.
    I checked the error_log and did NOT find a line like this:

    {Tue Mar 2 10:00:00 2004] [notice] Apache/2.0.48 (Win32) PHP/4.3.4
    configured

    Per Julie Meloni's book, such a message would tell me that "PHP is
    happily cohabiting with Apache" (i.e., is successfully installed).

    Because I did not see that kind of message, I am assuming that PHP is
    not "happily cohabiting with Apache," that it is not installed, and
    that I do not have the correct path(s) delineated.


    QUESTIONS

    Here are my questions:
    (1) Is it true that the problem is a path problem?
    (2) If so, what would the correct path(s) be?
    (3) Where do the above-noted DLL files, the EXE file, and the INI file
    need to be located to fulfill all of the stated requirements? These
    requirements include: (a) that these files be findable by the programs
    that require them, and (b) that these files be located within my
    Program Files directory so that I myself can find them and easily
    launch them.
    (4) Is it necessary to have the DLL and EXE and INI files exist
    redundantly in any of the locations indicated? If so, which and
    where?
    (5) Are there serious potential problems with such redundancies? If
    so, could you please tell me which instances of these copied files I
    should definitely remove?


    SYSTEM TREE (as relevant to current installation)

    * Desktop
    * * My Computer
    * * * C:
    * * * * mysql [etc. files and folders]
    * * * * php-4.3.4-Win32
    -php4apache2.dll
    -php4apache.dll
    -php4ts.dll
    -php.exe
    -php.ini
    -[etc. files]
    * * * * * cli
    -php.exe
    * * * * * [etc. folders]
    * * * * * sapi
    -php4apache2.dll
    -php4apache.dll
    -php4ts.dll
    -php.exe
    -php.ini
    -[etc.files]
    * * * * Program Files
    * * * * * Apache Group
    * * * * * * Apache2
    * * * * * * * conf [etc. folders]
    * * * * * * * - httpd.conf [etc. files]
    * * * * WINDOWS
    * * * * * system
    -php4apache2.dll
    -php4apache.dll
    -php4ts.dll
    -php.exe
    -php.ini
    * * * * * system32
    -php4apache2.dll
    -php4apache.dll
    -php4ts.dll
    -php.exe
    -php.ini

    Thank you very much for whatever assistance you can provide.
  • Geoff Berrow

    #2
    Re: php-4.3.4-Win + Apache2 + XP

    I noticed that Message-ID:
    <3b7dfeea.04030 32011.23a89d67@ posting.google. com> from Ad Astra
    contained the following:
    [color=blue]
    >I am completely new to PHP and am finding installation the most
    >difficult part to understand and implement.[/color]
    <snip tale of woe>

    Wow.

    I saved myself all this bother by using phpdev from
    http://www.firepages.com.au/ I think you need phpdev423 then the 430
    upgrade.

    After that, on my win98 machine, installation was simplicity itself.

    --
    Geoff Berrow (put thecat out to email)
    It's only Usenet, no one dies.
    My opinions, not the committee's, mine.
    Simple RFDs http://www.ckdog.co.uk/rfdmaker/

    Comment

    • Perry Lewis

      #3
      Re: php-4.3.4-Win + Apache2 + XP

      I run a nearly identical configuration for AMP (Apache, MySQL, PHP).

      Cut down on some of the confusion you are experiencing, I will email you
      what you need to do.

      Much easier than you might think.

      "Ad Astra" <adastra@cwnet. com> wrote in message
      news:3b7dfeea.0 403032011.23a89 d67@posting.goo gle.com...[color=blue]
      > I am completely new to PHP and am finding installation the most
      > difficult part to understand and implement. Could someone please
      > review the rather long missive below and assist me? I have provided
      > it in as clear a fashion as possible.
      >
      >
      > COMPONENTS
      >
      > * Windows XP (Home) [Version 2002/Service Pack 1 installed]
      > * Apache2 server [Version 2.0.48] (successfully installed; located as
      > shown in the tree below)
      > * php-4.3.4-Win (unzipped; located as shown in the tree below)
      > * mySQL 4.0.17 (unzipped; located as shown in the tree below)
      >
      >
      > FACTS
      >
      > I am doing a manual(server module, not CGI) install of PHP. I intend
      > to undertake the installation of mySQL after PHP is successfully
      > installed.
      >
      > I have put DLLs in various places (overkill, I know) so that they "can
      > be found," a requirement spoken of in the PHP install.txt file. [The
      > thing that will be doing the finding has not been identified in the
      > PHP install.txt file. Is it the Apache2 server? the PHP program?
      > both? something else?] I would like to have the DLLs only where they
      > need to be, and to be able to remove them from the places they don't
      > need to be.
      >
      > The key DLLs and EXE mentioned in the PHP install.txt file are:
      > php4ts.dll
      > php4apache.dll
      > php.exe
      >
      > On my system,
      > RUN: %SYSTEMROOT%
      > yields
      > C:\WINDOWS
      >
      > I have relabeled
      > php.ini-dist
      > as
      > php.ini
      > and copied it to various locations (see the tree below).
      >
      > When I did the Apache2 install,
      > the installation program itself placed Apache2 in the
      > C:\Program Files\Apache Group directory,
      > a directory it created as part of the installation
      > and which appears at the same level as my
      > C:\WINDOWS (system root) directory.
      >
      > My preference is to have all three programs--the Apache2 server, PHP,
      > and mySQL--conveniently accessible via my Program Files directory,
      > from where I launch numerous other programs as well.
      >
      > Regarding the type of installation I am doing (in Windows XP), Julie
      > Meloni, in her new book PHP ESSENTIALS (Second Edition), instructs as
      > follows:
      > "1. In the PHP installation directory, find the php.ini-dist file
      > and rename it php.ini."
      > [I did this.]
      > "2. Move the php.ini file to C:\WINDOWS\ or wherever you usually
      > put your *.ini files."
      > [Actually, I don't "usually put my *.ini files"--this is the first
      > time ever. So I winged it and first put the php.ini file in
      > C:\WINDOWS\ as an obvious first choice; and then, later (after the
      > installation did not succeed), I copied it to various other locations,
      > as mentioned above and shown in the tree below.]
      > "3. Move the php4ts.dll file to C:\WINDOWS\SYST EM\ or wherever
      > you usually put your *.dll files."
      > [In my system, under C:\WINDOWS\ are two similarly named folders,
      > system\
      > and
      > system32\.
      > Taking no chances, I copied the php.ini file to both places. Later, I
      > placed it in the other locations shown, as well, knowing this was
      > probably neither necessary nor well conceived.]
      >
      > Concurrently, I referred to the information in the PHP install.txt
      > file, which confirmed Julie Meloni's Step 1.
      >
      > The choice of directory for Step 2, based on the PHP install.txt file,
      > was concluded to be C:\WINDOWS\ (the equivalent of %SYSTEMROOT%, based
      > on the RUN test I performed, as noted above). The information in the
      > PHP install.txt file tells me that the %SYSTEMROOT% directory
      > (C:\WINDOWS\, according to my test) is "typically: c:\winnt or
      > c:\winnt40 for NT/2000/XP servers". This appears not to be true for
      > XP; I have concluded this after spending some time looking for the
      > winnt and winnt40 directories without success.
      >
      > In the Apache2 configuration file
      > I did the careful inclusion of the uncommented line
      >
      > LoadModule php4_module c:/php-4.3.4-Win/sapi/php4apache2.dll
      >
      > at the very end of the section that starts
      >
      > # Example:
      > # LoadModule foo_module modules/mod_foo.so
      > #
      >
      > and lists numerous LoadModule items.
      >
      > In the Apache2 configuration file
      > I also did the careful inclusion of the uncommented lines
      >
      > AddType application/x-httpd-php .php
      > AddType application/x-httpd-php .html
      >
      > at the very end of the section that starts
      >
      > # AddType allows you to add or override the MIME configuration
      > # file mime.types for specific file types.
      >
      > I saved the file and closed it.
      > I started Apache.
      > I stopped Apache.
      > I checked the error_log and did NOT find a line like this:
      >
      > {Tue Mar 2 10:00:00 2004] [notice] Apache/2.0.48 (Win32) PHP/4.3.4
      > configured
      >
      > Per Julie Meloni's book, such a message would tell me that "PHP is
      > happily cohabiting with Apache" (i.e., is successfully installed).
      >
      > Because I did not see that kind of message, I am assuming that PHP is
      > not "happily cohabiting with Apache," that it is not installed, and
      > that I do not have the correct path(s) delineated.
      >
      >
      > QUESTIONS
      >
      > Here are my questions:
      > (1) Is it true that the problem is a path problem?
      > (2) If so, what would the correct path(s) be?
      > (3) Where do the above-noted DLL files, the EXE file, and the INI file
      > need to be located to fulfill all of the stated requirements? These
      > requirements include: (a) that these files be findable by the programs
      > that require them, and (b) that these files be located within my
      > Program Files directory so that I myself can find them and easily
      > launch them.
      > (4) Is it necessary to have the DLL and EXE and INI files exist
      > redundantly in any of the locations indicated? If so, which and
      > where?
      > (5) Are there serious potential problems with such redundancies? If
      > so, could you please tell me which instances of these copied files I
      > should definitely remove?
      >
      >
      > SYSTEM TREE (as relevant to current installation)
      >
      > * Desktop
      > * * My Computer
      > * * * C:
      > * * * * mysql [etc. files and folders]
      > * * * * php-4.3.4-Win32
      > -php4apache2.dll
      > -php4apache.dll
      > -php4ts.dll
      > -php.exe
      > -php.ini
      > -[etc. files]
      > * * * * * cli
      > -php.exe
      > * * * * * [etc. folders]
      > * * * * * sapi
      > -php4apache2.dll
      > -php4apache.dll
      > -php4ts.dll
      > -php.exe
      > -php.ini
      > -[etc.files]
      > * * * * Program Files
      > * * * * * Apache Group
      > * * * * * * Apache2
      > * * * * * * * conf [etc. folders]
      > * * * * * * * - httpd.conf [etc. files]
      > * * * * WINDOWS
      > * * * * * system
      > -php4apache2.dll
      > -php4apache.dll
      > -php4ts.dll
      > -php.exe
      > -php.ini
      > * * * * * system32
      > -php4apache2.dll
      > -php4apache.dll
      > -php4ts.dll
      > -php.exe
      > -php.ini
      >
      > Thank you very much for whatever assistance you can provide.[/color]


      Comment

      • Pedro Graca

        #4
        Re: php-4.3.4-Win + Apache2 + XP

        Ad Astra wrote (edited):[color=blue]
        > Can't get Apache, PHP, and MySQL working!
        > Please help.[/color]
        [color=blue]
        > Thank you very much for whatever assistance you can provide.[/color]

        Undo everything you did!
        just kidding :)

        Here's how I do it for PHP5:

        1. Install, configure and test Apache from the .msi at the Apache site
        (no need to copy files anywhere)

        2. Unzip, install, configure, and test MySQL from the .zip at the MySQL
        web site
        (no need to copy files anywhere)

        3. Unzip PHP from the .zip at the PHP web site
        4. Edit Apache's httpd.conf adding these lines
        LoadModule php5_module <PHP_DIR>/php5apache2.dll
        AddType application/x-httpd-php .php
        (Can't remember if this works for PHP4)
        5. Copy php.ini to the directory just below the one httpd.conf is in
        (This is the only file I need to copy manually)

        6. Stop and Start Apache
        7. Test with phpinfo()


        As I don't like to have things in "Program Files" (that space gives me
        the creeps) my directory structure is

        C:\Utils\Apache contains php.ini
        C:\Utils\Apache \conf contains httpd.conf
        C:\Utils\php where I extracted php.zip
        C:\Utils\mysql where I installed MySQL
        --
        --= my mail box only accepts =--
        --= Content-Type: text/plain =--
        --= Size below 10001 bytes =--

        Comment

        • Savut

          #5
          Re: php-4.3.4-Win + Apache2 + XP

          I had successfully install all these on XP without problem.
          Here some tips:

          1. Php.ini should be only at c:\windows (dont overkill you system :D)
          2. All file in c:\php\dlls and also php4ts.dll should be copied to
          c:\windows\syst em32
          3. PHP is here c:\php
          Mysql is at c:\mysql
          Apache2 is at the default install directory (program files)
          4. LoadModule php4_module c:/php/sapi/php4apache2.dll
          AddType application/x-httpd-php .php
          5. Check if php.ini is well configured, the most important part is
          extensions_dir = "c:/php/extensions"
          6. To run mysql, the best way is to run c:\mysql\bin\my sqladmin.exe

          Good luck

          Savut

          Comment

          • Ad Astra

            #6
            Re: php-4.3.4-Win + Apache2 + XP

            Thanks to each of you for your assistance and inspiration, I succeeded
            today in getting PHP up and running on my system. I am adding a few
            notes to Savut's very helpful core list in case some other newbie like
            me comes along who needs what for you are probably pretty obvious
            steps (for some of us they are not). I've put double angle brackets[color=blue][color=green]
            >> around Savut's list numbers to identify them.[/color][/color]
            --Ad Astra

            [This is for Apache2 + php4.3.4 + MySQL (manual installation) on
            Windows XP:]
            -Download the PHP program to Desktop.
            -Unzip the PHP program with an unzip program [I used CuteZIP], and
            have the unzip program install PHP in the "C:\" folder.
            -Change the PHP download's long name [for me, it was php-4.3.4-Win] to
            simply "php".
            -Within the (newly named) "php" folder, find the "php.ini-dist" and
            "php.ini-recommended" files and select one of them to copy and rename.
            [I chose the "recommende d" version, based on what I read in the PHP
            online manual.][color=blue][color=green]
            >>1.>>[/color][/color]
            -Copy the chosen file, rename it to simply "php.ini", and move it to
            the "C:\WINDOWS " folder.
            [The "php.ini" file should be located only at "C:\WINDOWS ".][color=blue][color=green]
            >>2.>>[/color][/color]
            -Find the "C:\php\dll s" folder and open it. Copy all of the
            individual DLL files to the "C:\WINDOWS\sys tem32" folder.
            -Find the "C:\php" folder and open it. Copy the "php4ts.dll " file to
            the "C:\WINDOWS\sys tem32" folder.[color=blue][color=green]
            >>3.>>[/color][/color]
            PHP is here: "C:\php".
            MySQL is at "C:\mysql".
            Apache2 is in the default install directory ("C:\Program Files\Apache
            Group").[color=blue][color=green]
            >> 4.>> Using a text editor [I used EditPad Pro] to modify the Apache2[/color][/color]
            configuration file (found in "C:\Program Files\Apache
            Group\Apache2\c onf\httpd.conf" ), find the block of "LoadModule "
            entries. At the end of the block, add the following (uncommented)
            line:

            LoadModule php4_module c:/php/sapi/php4apache2.dll

            Find the block of "AddType" entries. At the end of the block, add the
            following (uncommented) line:

            AddType application/x-httpd-php .php
            [color=blue][color=green]
            >>5.>>Make sure the "php.ini" file is well configured. [The most[/color][/color]
            important part to consider is the extensions directory.] Open the
            "C:\WINDOWS\php .ini" file with your text editor [I used EditPad Pro]
            and search for the following:

            extension_dir =

            Complete the line so that it looks like this:

            extension_dir = "C:/php/extensions"

            -Use a text editor to create a test program entitled "first.php" . For
            example:
            <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
            <HTML><HEAD><TI TLE>My First PHP Script</TITLE></HEAD>
            <BODY><?php echo "<P>Hello, World! I'm using PHP!</P>\n";
            ?></BODY></HTML>
            -Place this "first.php" file in the "C:\Program Files\Apache
            Group\Apache2\h tdocs" folder.
            -Launch your browser and call up "first.php" in the URL line. [In my
            case, I used "http://127.0.0.1/first.php" in the URL line (for the
            localhost setup).]
            -Provided each step has been done correctly and the "first.php" file
            contains no typos, the output in the browser window should be the line
            "Hello, World! I'm using PHP!"
            [color=blue][color=green]
            >>6.>>To run MySQL (mysql), the best way is to run[/color][/color]
            C:\mysql\bin\my sqladmin.exe.

            If you spot any errors in the above, let me know. I think it's
            accurate, though.--Ad Astra

            Comment

            Working...