Reading JPG File

[jcasique.torres@gmail.com]

Hi everyboy.

I trying to create a C promang in an AIX System to read JPG files but
when it read just the first 4 bytes when it found a DLE character (^P)
doesn't read anymore. I using fread function. Here a few lines:

char *sAnv;
....

sprintf(file_a, "%s/anverso.jpg", strDir);

if ((fImagen = fopen(file_a,"r b")) == NULL)
{
printf("ERROR: No se pudo abrir el archivo |%s|\n", file_a);
continue;
}

fseek(fImagen, 0, SEEK_END);
lLongitud = ftell(fImagen);
rewind(fImagen) ;

sAnv = (char *) malloc(sizeof(c har) * lLongitud);

if (!sAnv)
{
printf("Problem a de memoria. Imagen anverso. Tamaño: (%d)\n",
lLongitud);
fin(-1);
}

fread(sAnv, 1, lLongitud, fImagen);

fclose(fImagen) ;
.....
free(sAnv);

Does anybody help with this problem.

P.D. Sorry about my english but it doesn't my native
language. :-)

[Jens Thoms Toerring]

Re: Reading JPG File

jcasique.torres @gmail.com wrote:

I trying to create a C promang in an AIX System to read JPG files but
when it read just the first 4 bytes when it found a DLE character (^P)
doesn't read anymore. I using fread function. Here a few lines:

char *sAnv;
....
sprintf(file_a, "%s/anverso.jpg", strDir);

if ((fImagen = fopen(file_a,"r b")) == NULL)
{
printf("ERROR: No se pudo abrir el archivo |%s|\n", file_a);
continue;
}

fseek(fImagen, 0, SEEK_END);
lLongitud = ftell(fImagen);
rewind(fImagen) ;

This will rather likely work on your system, but it won't
hurt to take a look at question 19.12 in the C-FAQ.

sAnv = (char *) malloc(sizeof(c har) * lLongitud);

Better drop the cast, it will only keep the compiler from
warning you if you forgot to include <stdlib.h(whi ch in
turn can lead to nasty problems). You may also consider to
drop the 'sizeof(char)' since that's always 1 by definition
(and you use 1 under similar circumstances in the call of
fread()).

if (!sAnv)
{
printf("Problem a de memoria. Imagen anverso. Taman?o: (%d)\n",
lLongitud);
fin(-1);
}

fread(sAnv, 1, lLongitud, fImagen);

How do you found out that this didn't do what you want? You
don't test the return value of fread(), so I don't see how
you determined that "it read just the first 4 bytes". There
is no obvious reason here why fread() should have stopped
reading after 4 bytes (unless 'lLongitud' is 4). It defi-
nitely shouldn't do so just because of any special data in
the file (like the DLE character).

P.D. Sorry about my english but it doesn't my native
language. :-)

Don't worry, neither is it mine;-)

Best regards, Jens
--
\ Jens Thoms Toerring ___ jt@toerring.de
\______________ ____________ http://toerring.de

[jcasique.torres@gmail.com]

Re: Reading JPG File

On 14 mayo, 18:18, j...@toerring.d e (Jens Thoms Toerring) wrote:

jcasique.tor... @gmail.com wrote:

I trying to create a C promang in an AIX System to read JPG files but
when it read just the first 4 bytes when it found a DLE character (^P)
doesn't read anymore. I using fread function. Here a few lines:
char *sAnv;
....
sprintf(file_a, "%s/anverso.jpg", strDir);
if ((fImagen = fopen(file_a,"r b")) == NULL)
{
printf("ERROR: No se pudo abrir el archivo |%s|\n", file_a);
continue;
}
fseek(fImagen, 0, SEEK_END);
lLongitud = ftell(fImagen);
rewind(fImagen) ;

>
This will rather likely work on your system, but it won't
hurt to take a look at question 19.12 in the C-FAQ.

Thank you I made the change and it work's ok.

>

sAnv = (char *) malloc(sizeof(c har) * lLongitud);

>
Better drop the cast, it will only keep the compiler from
warning you if you forgot to include <stdlib.h(whi ch in
turn can lead to nasty problems). You may also consider to
drop the 'sizeof(char)' since that's always 1 by definition
(and you use 1 under similar circumstances in the call of
fread()).
>

if (!sAnv)
{
printf("Problem a de memoria. Imagen anverso. Taman?o: (%d)\n",
lLongitud);
fin(-1);
}
fread(sAnv, 1, lLongitud, fImagen);

>
How do you found out that this didn't do what you want? You
don't test the return value of fread(), so I don't see how
you determined that "it read just the first 4 bytes". There
is no obvious reason here why fread() should have stopped
reading after 4 bytes (unless 'lLongitud' is 4). It defi-
nitely shouldn't do so just because of any special data in
the file (like the DLE character).

Well I set a variable with the result of fread something like this

size_t resultado;
...
resultado = fread{sAnv,1,lL ongitud,fImagen );

then I print a message with two variables printf("Longitu d: (%d)
LeÃdo (%d)\n",lLongit ud,resultado); and are the same values

But when I print the sAnv variable it just have 4 bytes
printf("Bytes leÃdos: |%s|\n",sAnv); --Byte leÃdos: | Ï Ó|

Here I put a extract from JPG file
############### ############## B E G I N
############### ############### ############### ############### ######
Ï Ó^PJFIF^A^A^Aâ •šâ•š
█CP7<F<2PFAFZ UP_x╚^┬xnnx §»╣^Ð╚
└^K^H^A9^B╝ ^A^A^Q ─^Y^A^A^A^A^A ^A^A^B^C^D^E
─A^P^B^B^A^B^ D^B^H^D^D^E^C^D
^B^C^A^B^Q^C^R! ^D^S1AQ^Ð^T"2R aq^┴ÐS^ÊÃà Ÿ#Bbâ–’3Crâ”´Â 4^¢$cs±^E5 ^UTd
┌^H^A^A?¤^Zâ ”€gZ$l
;¤q ^K&^â””^┼`â”” ^U ^├ß,DNy3^Ll^ V^â•”'â–‘^├^â –ˆ^X^Fâ–„
Ù┐IND^]Xnh@t^Ka^Í^ã ¦f^È^ãPGC╝⠖“3^ERâ• h^NÂ^H ^Pv="
Y4%^â•”,]X┐^Hâ–‘:^Ì■“─^ÃaÏ║® d´,DDI{È^
]óã▀^Y^C^B{ ¨^Y®./
z▀╩FuP^K^Z^ GãPA^V^M^╔bK ^G╝▓^R^GSRj Z╗^U.á:^Ð^A ^┴ÞD^B^H▒, DDDH^H"Ã
############### ############### # E N D
############### ############### ############### ############### ########

>

P.D. Sorry about my english but it doesn't my native
language. :-)

>
Don't worry, neither is it mine;-)
>
Best regards, Jens
--
\ Jens Thoms Toerring ___ j...@toerring.d e
\______________ ____________ http://toerring.de

[Spiros Bousbouras]

Re: Reading JPG File

On 15 May, 04:27, jcasique.tor... @gmail.com wrote:

On 14 mayo, 18:18, j...@toerring.d e (Jens Thoms Toerring) wrote:
>
>
>

jcasique.tor... @gmail.com wrote:

I trying to create a C promang in an AIX System to read JPG files but
when it read just the first 4 bytes when it found a DLE character (^P)
doesn't read anymore. I using fread function. Here a few lines:
char *sAnv;
....
sprintf(file_a, "%s/anverso.jpg", strDir);
if ((fImagen = fopen(file_a,"r b")) == NULL)
{
printf("ERROR: No se pudo abrir el archivo |%s|\n", file_a);
continue;
}
fseek(fImagen, 0, SEEK_END);
lLongitud = ftell(fImagen);
rewind(fImagen) ;

>

This will rather likely work on your system, but it won't
hurt to take a look at question 19.12 in the C-FAQ.

>
Thank you I made the change and it work's ok.
>
>
>
>
>

sAnv = (char *) malloc(sizeof(c har) * lLongitud);

>

Better drop the cast, it will only keep the compiler from
warning you if you forgot to include <stdlib.h(whi ch in
turn can lead to nasty problems). You may also consider to
drop the 'sizeof(char)' since that's always 1 by definition
(and you use 1 under similar circumstances in the call of
fread()).

>

if (!sAnv)
{
printf("Problem a de memoria. Imagen anverso. Taman?o: (%d)\n",
lLongitud);
fin(-1);
}
fread(sAnv, 1, lLongitud, fImagen);

>

How do you found out that this didn't do what you want? You
don't test the return value of fread(), so I don't see how
you determined that "it read just the first 4 bytes". There
is no obvious reason here why fread() should have stopped
reading after 4 bytes (unless 'lLongitud' is 4). It defi-
nitely shouldn't do so just because of any special data in
the file (like the DLE character).

>
Well I set a variable with the result of fread something like this
>
size_t resultado;
...
resultado = fread{sAnv,1,lL ongitud,fImagen );
>
then I print a message with two variables printf("Longitu d: (%d)
Leído (%d)\n",lLongit ud,resultado); and are the same values
>
But when I print the sAnv variable it just have 4 bytes
printf("Bytes leídos: |%s|\n",sAnv); --Byte leídos: | Ï Ó|

The printf() will print up to the first NUL (0) byte in sAnv
This doesn't mean that fread() did not put more bytes
where sAnv points to.

Here I put a extract from JPG file

This isn't the right place to post binary files.

[Jens Thoms Toerring]

Re: Reading JPG File

jcasique.torres @gmail.com wrote:

On 14 mayo, 18:18, j...@toerring.d e (Jens Thoms Toerring) wrote:

jcasique.tor... @gmail.com wrote:

if (!sAnv)
{
printf("Problem a de memoria. Imagen anverso. Tamano: (%d)\n",
lLongitud);
fin(-1);
}
fread(sAnv, 1, lLongitud, fImagen);

How do you found out that this didn't do what you want? You
don't test the return value of fread(), so I don't see how
you determined that "it read just the first 4 bytes". There
is no obvious reason here why fread() should have stopped
reading after 4 bytes (unless 'lLongitud' is 4). It defi-
nitely shouldn't do so just because of any special data in
the file (like the DLE character).

Well I set a variable with the result of fread something like this

size_t resultado;
...
resultado = fread{sAnv,1,lL ongitud,fImagen );

then I print a message with two variables printf("Longitu d: (%d)
LeÃdo (%d)\n",lLongit ud,resultado); and are the same values

That shows that fread worked exactly as expected, it did read
as many bytes as you told it to.

But when I print the sAnv variable it just have 4 bytes
printf("Bytes leÃdos: |%s|\n",sAnv); --Byte leÃdos: | Ï Ó|

That's to be expected. Using '%s' with printf() is for printing
strings. And a string is a char array where the data end with
the first '\0' character (and printf() stops at that position).
But what you read in from the file isn't a string, just an array
of chars with binary data. And, while binary data may contain
'\0' characters they definitely aren't meant to be treated like
strings, so you simply can't use printf() with '%s' to output
them (which normally would result in a lot of unreadable "noise"
anyway).

So the good news is that obviously reading in the data from the
file worked flawlessly. Question is why you want to print
them out. There will hardly be much human readable information
in there. And if you want to see what the binary data are you
will have to write a function that prints out the numerical
values of the binary data, that's what would make the most
sense.

Here I put a extract from JPG file

Which doesn't help at all since also most newsreaders can make
sense of binary data (and even may get them confused, so it's
not a goood idea to include binary data in a message).

Regards, Jens
--
\ Jens Thoms Toerring ___ jt@toerring.de
\______________ ____________ http://toerring.de

[jcasique.torres@gmail.com]

Re: Reading JPG File

On 15 mayo, 02:37, j...@toerring.d e (Jens Thoms Toerring) wrote:

jcasique.tor... @gmail.com wrote:

On 14 mayo, 18:18, j...@toerring.d e (Jens Thoms Toerring) wrote:

jcasique.tor... @gmail.com wrote:
if (!sAnv)
{
printf("Problem a de memoria. Imagen anverso. Tamano: (%d)\n",
lLongitud);
fin(-1);
}
fread(sAnv, 1, lLongitud, fImagen);

>

How do you found out that this didn't do what you want? You
don't test the return value of fread(), so I don't see how
you determined that "it read just the first 4 bytes". There
is no obvious reason here why fread() should have stopped
reading after 4 bytes (unless 'lLongitud' is 4). It defi-
nitely shouldn't do so just because of any special data in
the file (like the DLE character).

Well I set a variable with the result of fread something like this
size_t resultado;
...
resultado = fread{sAnv,1,lL ongitud,fImagen );
then I print a message with two variables printf("Longitu d: (%d)
Leído (%d)\n",lLongit ud,resultado); and are the same values

>
That shows that fread worked exactly as expected, it did read
as many bytes as you told it to.
>

But when I print the sAnv variable it just have 4 bytes
printf("Bytes leídos: |%s|\n",sAnv); --Byte leídos: | Ï Ó|

>
That's to be expected. Using '%s' with printf() is for printing
strings. And a string is a char array where the data end with
the first '\0' character (and printf() stops at that position).
But what you read in from the file isn't a string, just an array
of chars with binary data. And, while binary data may contain
'\0' characters they definitely aren't meant to be treated like
strings, so you simply can't use printf() with '%s' to output
them (which normally would result in a lot of unreadable "noise"
anyway).
>
So the good news is that obviously reading in the data from the
file worked flawlessly. Question is why you want to print
them out. There will hardly be much human readable information
in there. And if you want to see what the binary data are you
will have to write a function that prints out the numerical
values of the binary data, that's what would make the most
sense.
>

Really I don't want to print the information on screen i do it just
to check that is working ok, i need to read the severals JPG files to
hold in one file in which i will include the long of each image, this
file will be transfer to another place to extract them with another
program and save into a database.

Here I put a extract from JPG file

>
Which doesn't help at all since also most newsreaders can make
sense of binary data (and even may get them confused, so it's
not a goood idea to include binary data in a message).

Ok i will never do it again!! ty

>
Regards, Jens

Regards

--
\ Jens Thoms Toerring ___ j...@toerring.d e
\______________ ____________ http://toerring.de

[Jens Thoms Toerring]

Re: Reading JPG File

jcasique.torres @gmail.com wrote:

Really I don't want to print the information on screen i do it just
to check that is working ok,

Fine. Then the only test you need to do is to check if you got
as many characters as you requested. Only if the return value
of fread() isn't identical to the number of bytes you asked it
read you're in trouble. Otherwise you can assume that everything
is fine.
Regards, Jens
--
\ Jens Thoms Toerring ___ jt@toerring.de
\______________ ____________ http://toerring.de