Two questions about a program in C

[Eoghan]

Hi there! I have two simple questions about a program i'm doing:
1) if I write:
enum logic {VERO=1, FALSO=0};
logic trovato=VERO;

Is this correct according to the ANSI '89 standard?

2) I have these lines:
void GetInfo(void)
{
int i=0;
char Dato[256];
printf("Inserir e i dati numero %i: ", ++i);
scanf("%[^\n]", Dato);
fflush(stdin);

while( strcmp(Dato, "FINE") )
{
Riempi_Info(Dat o); //Fills an array called Estremi
printf("Sigla: %s \t Inizio: %f \tFine: %f\n", Sigle[Nstr],
Estremi[Nstr][0], Estremi[Nstr][1] );
i++;
Nstr++;
printf("Inserir e i dati numero %i: ", i);
scanf("%[^\n]", Dato);
fflush(stdin);
}
return;
}

Why does the program crash if I don't call the function fflush after
each scanf? And why in windows can't I use the function fpurge instead?

[Dave Hansen]

Re: Two questions about a program in C

On Feb 8, 1:31 pm, Eoghan <lucaga...@gmai l.comwrote:

Hi there! I have two simple questions about a program i'm doing:
1) if I write:
enum logic {VERO=1, FALSO=0};
logic trovato=VERO;
>
Is this correct according to the ANSI '89 standard?

No. This isn't C++. You need to either add

typedef enum logic logic;

before the definition, or change the definition to

enum logic trovato=VERO;

>
2) I have these lines:

[...]

scanf("%[^\n]", Dato);
fflush(stdin);

[...]

>
Why does the program crash if I don't call the function fflush after
each scanf? And why in windows can't I use the function fpurge instead?

Don't do that. http://c-faq.com/stdio/stdinflush.html

Regards,

-=Dave

[Walter Roberson]

Re: Two questions about a program in C

In article <edfbc8a7-0c4b-4d4e-a1e2-c4550b337c1e@i2 9g2000prf.googl egroups.com>,
Eoghan <lucagalbu@gmai l.comwrote:

>2) I have these lines:
>void GetInfo(void)
>{
> int i=0;
> char Dato[256];
> printf("Inserir e i dati numero %i: ", ++i);
> scanf("%[^\n]", Dato);

Output is not certain to appear before the next input
(especially when the output does not end in '\n') unless
the output stream is fflush()'d.

You did not put a size constraint on the scanf(), so if the
user enters more characters than you have alloted (255) then
your program will have undefined behaviour.

> fflush(stdin);

fflush() is only defined for output and update streams.

--
"I was very young in those days, but I was also rather dim."
-- Christopher Priest

[Eric Sosman]

Re: Two questions about a program in C

Eoghan wrote:

Hi there! I have two simple questions about a program i'm doing:
1) if I write:
enum logic {VERO=1, FALSO=0};
logic trovato=VERO;
>
Is this correct according to the ANSI '89 standard?

No. Change `logic' to `enum logic' and it will be correct.

2) I have these lines:
void GetInfo(void)
{
int i=0;
char Dato[256];
printf("Inserir e i dati numero %i: ", ++i);
scanf("%[^\n]", Dato);
fflush(stdin);
>
while( strcmp(Dato, "FINE") )
{
Riempi_Info(Dat o); //Fills an array called Estremi
printf("Sigla: %s \t Inizio: %f \tFine: %f\n", Sigle[Nstr],
Estremi[Nstr][0], Estremi[Nstr][1] );
i++;
Nstr++;
printf("Inserir e i dati numero %i: ", i);
scanf("%[^\n]", Dato);
fflush(stdin);
}
return;
}
>
Why does the program crash if I don't call the function fflush after
each scanf?

Probably because of something in Riempi_Info, or in the
declarations of Estremi, Sigle, and Nstr. Unfortunately, you
have not shown any of these, so we cannot tell.

fflush(stdin) invokes undefined behavior. Perhaps the
error of fflush(stdin) somehow cancels out the other error(s).

And why in windows can't I use the function fpurge instead?

There is no fpurge() function in the Standard C library.
If it's a Windows thing, ask about it in a Windows forum.

--
Eric Sosman
esosman@ieee-dot-org.invalid

[Ben Bacarisse]

Re: Two questions about a program in C

Eoghan <lucagalbu@gmai l.comwrites:

Hi there! I have two simple questions about a program i'm doing:
1) if I write:
enum logic {VERO=1, FALSO=0};
logic trovato=VERO;
>
Is this correct according to the ANSI '89 standard?

No, you need to say: 'enum logic trovato = VERO;' and if you are not
getting a diagnostic from your version you should review what compiler
options you are using.

>
2) I have these lines:
void GetInfo(void)
{
int i=0;
char Dato[256];
printf("Inserir e i dati numero %i: ", ++i);
scanf("%[^\n]", Dato);
fflush(stdin);

You simply are not allowed to do this in a portable program. Your
system is allowed to define some meaning for this code, but it means
nothing in standard C. fflush is for output streams.

To replace this, write a look that skips to EOF or newline (as a
function, of course!). Maybe:

int c;
do {
c = getc(stdin);
} while (c != EOF && c != '\n');

>
while( strcmp(Dato, "FINE") )
{
Riempi_Info(Dat o); //Fills an array called Estremi
printf("Sigla: %s \t Inizio: %f \tFine: %f\n", Sigle[Nstr],
Estremi[Nstr][0], Estremi[Nstr][1] );
i++;
Nstr++;
printf("Inserir e i dati numero %i: ", i);
scanf("%[^\n]", Dato);
fflush(stdin);
}
return;
}
>
Why does the program crash if I don't call the function fflush after
each scanf?

My guess is that problem is be caused by other parts of your program
(not shown) doing something wrong when the scanf reads an empty
string.

And why in windows can't I use the function fpurge instead?

Why would you want to? Stick to standard C and your program will run
almost anywhere.

--
Ben.

[Eoghan]

Re: Two questions about a program in C

On the web fpurge is said to be included in stdio.h

I'm sure the string has less than 256 characters, however here's the
code of RiempiInfo:
void Riempi_Info(cha r* str)
{
int k=0;

while(str[k]!=' ' && str[k]!='\0') Sigle[Nstr][k]=str[k++];

str=strchr(str, (int)' ');
Estremi[Nstr][0]=atof(&str[1]);

/*Parto da str[1] perche' str[0] e' gia uno spazio*/
str=strchr(&str[1], (int)' ');
Estremi[Nstr][1]=atof(&str[1]);
return;
}

where the variables are:
char Sigle[256][10]; (I'm way sure Nstr is less than 256)
float Estremi[100][2];

[Eoghan]

Re: Two questions about a program in C

If I don't use fflush the program behaves liek this:

Inserire i dati numero 1:

I write:One 0.0 0.3 and I press return

Then the programs writes:

Sigla: ewf Inizio: 0.000000 Fine: 0.300000
Inserire i dati numero 2: Sigla: ewf Inizio: 0.000000 Fine:
0.300000
Inserire i dati numero 3: Sigla: ewf Inizio: 0.000000 Fine:
0.300000
Inserire i dati numero 4: Sigla: ewf Inizio: 0.000000 Fine:
0.300000
Inserire i dati numero 5: Sigla: ewf Inizio: 0.000000 Fine:
0.300000
Inserire i dati numero 6: Sigla: ewf Inizio: 0.000000 Fine:
0.300000
Inserire i dati numero 7: Sigla: ewf Inizio: 0.000000 Fine:
0.300000
Inserire i dati numero 8: Sigla: ewf Inizio: 0.000000 Fine:
0.300000
Inserire i dati numero 9: Sigla: ewf Inizio: 0.000000 Fine:
0.300000
.....
and so on

[Default User]

Re: Two questions about a program in C

Eoghan wrote:

On the web fpurge is said to be included in stdio.h

It is not a standard C function. Whether or not some implementation
includes a declaration in a standard header doesn't change that.



Brian

[Default User]

Re: Two questions about a program in C

Eoghan wrote:

If I don't use fflush the program behaves liek this:

You're probably leaving newlines in the input buffer. See the FAQs:

<http://c-faq.com/stdio/stdinflush.html >
<http://c-faq.com/stdio/stdinflush2.htm l>


You can't portably use fflush() on an input stream.




Brian

[Eoghan]

Re: Two questions about a program in C

Well, as some of you said, I left my computer for 5 minutes, I
executed the program again and fflush didn't work anymore!

But I think I solved the problem. Because I used this version of
scanf: scanf("%[^\n]", Dato), the \n character was never read. So
using the function proposed by Ben Bacarisse, everything seems to be
allright.
Do you think that this way to use scanf could have been the problem?

Anyway, abaout the use of enum logic:
I buill the source with VC6 and XCode but I didn't have problems. I
had problems with and older version of XCode. However, you have said
that the enumerations are included in ansi '89 standard of C++, but
also in the ansi '89 of C?

[Walter Roberson]

Re: Two questions about a program in C

In article <05277b7d-579b-4c97-ae12-075545a6b37d@e2 5g2000prg.googl egroups.com>,
Eoghan <lucagalbu@gmai l.comwrote:

>However, you have said
>that the enumerations are included in ansi '89 standard of C++, but
>also in the ansi '89 of C?

No, the first C++ standard was 1998, not 1989.

The 1989 ANSI C standard describes enumerations in sections
3.1.2.5, 3.5.2.2, and 3.5.2.3.
--
"There are some ideas so wrong that only a very intelligent person
could believe in them." -- George Orwell

[Ben Bacarisse]

Re: Two questions about a program in C

Eoghan <lucagalbu@gmai l.comwrites:

But I think I solved the problem. Because I used this version of
scanf: scanf("%[^\n]", Dato), the \n character was never read. So
using the function proposed by Ben Bacarisse, everything seems to be
allright.
Do you think that this way to use scanf could have been the problem?

Yes. I think about three (maybe more!) people have posted remarks to
say that not reading past the newline character is the root of the
problem.

Anyway, abaout the use of enum logic:
I buill the source with VC6 and XCode but I didn't have problems. I
had problems with and older version of XCode. However, you have said
that the enumerations are included in ansi '89 standard of C++, but
also in the ansi '89 of C?

You have to decide if you want C or C++ code. All versions of both
language standards have enumerations, but in C++ you can omit the
"enum" keyword because the enumeration tag acts as a type name. In C
it does not (and that applies to all versions of the language
standard).

--
Ben.

[pete]

Re: Two questions about a program in C

Eoghan wrote:

>
Hi there! I have two simple questions about a program i'm doing:
1) if I write:
enum logic {VERO=1, FALSO=0};

Is this correct according to the ANSI '89 standard?

That line is correct, but I think that
any of these ways to write it, would be better:

enum logic {FALSO = 0, VERO};

enum logic {FALSO, VERO};

enum logic {FALSO = 0, VERO = 1};

--
pete

[Jack Klein]

Re: Two questions about a program in C

On Fri, 8 Feb 2008 13:56:50 -0800 (PST), Eoghan <lucagalbu@gmai l.com>
wrote in comp.lang.c:

On the web fpurge is said to be included in stdio.h

Said by whom? What compiler, for what platform, are they talking
about?

If there is not an option to disable its inclusion in <stdio.h>, then
the implementation is not conforming.

--
Jack Klein
Home: http://JK-Technology.Com
FAQs for
comp.lang.c http://c-faq.com/
comp.lang.c++ http://www.parashift.com/c++-faq-lite/
alt.comp.lang.l earn.c-c++

http://www.club.cc.cmu.edu/~ajo/docs/FAQ-acllc.html

[Eric Sosman]

Re: Two questions about a program in C

pete wrote:

Eoghan wrote:

>Hi there! I have two simple questions about a program i'm doing:
>1) if I write:
>enum logic {VERO=1, FALSO=0};

>

>Is this correct according to the ANSI '89 standard?

>
That line is correct, but I think that
any of these ways to write it, would be better:
>
enum logic {FALSO = 0, VERO};
>
enum logic {FALSO, VERO};
>
enum logic {FALSO = 0, VERO = 1};

... but don't make this mistake, which a colleague
of mine once uncovered in somebody's actual code:

typedef enum { TRUE, FALSE } Boolean;

--
Eric Sosman
esosman@ieee-dot-org.invalid